When I turn the key to start the fuse blows right at the light position.And when i do get it to start the fuse blows when i turn it off.I put in a new ignition switch hoping that would solve my problem.It didnt. /forums/images/graemlins/confused.gif
Fuse keeps Blowing!!!!
- Thread starter ohiocub
- Start date
- Views: 2655
slowrev
Elite Member
You must have a short somewhere in the lights or wiring. It might help if we knew what brand/model of tractor you are having this problem on.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Over in the ford sub, an owner had that problem and it turned out to be a wire in the wire harness was damaged and shorting to the frame.
Try isolating one wire from that circuit at a time till you find the offender.
Easy way to do it is to disconnect all wires from that line and re-attatch till the fues blows. Could also check each line with an ohm meter or test light.. etc...
Soundguy
Try isolating one wire from that circuit at a time till you find the offender.
Easy way to do it is to disconnect all wires from that line and re-attatch till the fues blows. Could also check each line with an ohm meter or test light.. etc...
Soundguy
</font><font color="blue" class="small">( Problem Solved Thank You.
Now I Have Another Problem )</font>
Now that's not fair! You just telling us the problem is solved without saying what you did to repair it? Come on man, tell it all! /forums/images/graemlins/smirk.gif /forums/images/graemlins/wink.gif /forums/images/graemlins/grin.gif John
Now I Have Another Problem )</font>
Now that's not fair! You just telling us the problem is solved without saying what you did to repair it? Come on man, tell it all! /forums/images/graemlins/smirk.gif /forums/images/graemlins/wink.gif /forums/images/graemlins/grin.gif John
stuart
Gold Member
Right you are: Now he has another problem he wants help with and has not told us yet how he fixed the ist one. I suggest we not respond to his post till he opens up and gives us the repair facts.
