5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
I used cattle panels instead of rebar in my last pour. Was over 12 years ago and no cracks anywhere.
Galvanized chain link fence in concrete pour
- Thread starter yanmars
- Start date
- Views: 5293
jeffromano1
New member
Most likely not the most cost effective solution - but I would go with a welded hardware cloth wire ( something like a 2x2 welded wire mesh
Wire Mesh - Hardware Cloth
Chain link stuff will roll into itself - and you will basically be losing all the qualities (openings) that you are using it for in the first place. In my opinion, something welded open that will keep its shape and form will be your best bet - but again - much more expensive.
Wire Mesh - Hardware Cloth
Chain link stuff will roll into itself - and you will basically be losing all the qualities (openings) that you are using it for in the first place. In my opinion, something welded open that will keep its shape and form will be your best bet - but again - much more expensive.
