Gauges install on my BX-25

   / Gauges install on my BX-25 #1  

Tachdriver

Silver Member
Joined
Nov 20, 2010
Messages
224
Tractor
Kubota bx25
I bought a set of Sunpro mini gauges at AZ yesterday - 29.99. I have been thinking about a gauge pod installation since I bougt the machine. I guess I'm used to watching gauges all day long:laughing:

Anyway the Oil Psi gauge is not tapped into the stock sender yet - I need a 1/8" tee. Everything else is hooked up.

I also ran a 30 amp relay with 20amp fuse for any other aux items I may dream up. You will see spare butt connectors.

the pics do the story tellin'


DSC06298.jpg

DSC06296.jpg

DSC06290.jpg

DSC06292.jpg

DSC06293.jpg

DSC06301.jpg

DSC06299.jpg

DSC06300.jpg




later
 
   / Gauges install on my BX-25 #4  
So-as a newb, how does this change your user experience/machine functionality? Is oil pressure a reading I need imediAte access to? What will it signal beyond "need to get this back for service" shortly before I would have known anyway?
 
   / Gauges install on my BX-25 #5  
A transmission temp gauge would be handy . I believe the wiring
is in the harness , so that European models can run the display.
These BX's get hot ! Wish they had the B's cooler arrangement ....:(
 
   / Gauges install on my BX-25
  • Thread Starter
#6  
Heck, now I need a transmission gauge! ;)


later
 
   / Gauges install on my BX-25 #7  
What, no sock. Pic's and thread must be from a Tachdriver impostor!
 
   / Gauges install on my BX-25
  • Thread Starter
#8  

Tractor & Equipment Auctions

7ft. Bush Hog 357R-2 3pt. Rotary Mower (A46502)
7ft. Bush Hog...
2077 (A49339)
2077 (A49339)
2017 Chevrolet Malibu Sedan (A46684)
2017 Chevrolet...
NEW Fork Extensions (A48289)
NEW Fork...
3100 (A49339)
3100 (A49339)
Garage Door Panels (A46502)
Garage Door Panels...
 
Top