Snow Gc 2310 Snow Plow

[LBrown59]

1*Why not just clamp one of the blades you have to your FEL bucket?
It's quicker simpler and easier than taking the bucket and blade off and putting them back on.
2*I do to. But I'm not going to try cobbling one of them up to fit the FEL on the bx23.
If I need a blade I'll just use the Bolens or The Cub Cadet with the blade already on it.
3*One is on my 1966 Bolens 850 tractor.
4*The other one is on my new CC 2554 .
Guess I've done it a little different than you:
Instead of trying to put the Blade on the tractor - I've already put the tractor on the blade

Up date I replaced the Bolens and CC with a BX1500 with a front blade on it.

 

[WilliamBos]

Up date I replaced the Bolens and CC with a BX1500 with a front blade on it.

So you replaced 2 with 1. I wonder what the deeroids would think of this!! LOL :')

 

[pmharris]

help i built a snow plow for the front of my 2310 off of the fel arms since the boom and tilt cyl are all functioning what is the best way to get hyd to my power angle

 

[radioman]

ray - have you tought of lowering the wheels so its only an inch off the gravel ? or do you have other issues we not aware of ?