OP
todd92
Silver Member
- Joined
- Nov 24, 2005
- Messages
- 129
- Location
- Hunterdon County, NJ
- Tractor
- Case Farmall 75A, Kioti NX5510HST, Kioti CK3510SEHC, Farmall M, MF GC2310 TLB
I know it is there somewhere, I just can't find it!
GC2310 Removing Loader and BH
- Thread starter todd92
- Start date
- Views: 1935
OP
todd92
Silver Member
- Joined
- Nov 24, 2005
- Messages
- 129
- Location
- Hunterdon County, NJ
- Tractor
- Case Farmall 75A, Kioti NX5510HST, Kioti CK3510SEHC, Farmall M, MF GC2310 TLB
I know it is there somewhere, I just can't find it!
JerryG
Super Member
The backhoe will need the legs and the boom up normally. If it still binds you can stretch out the boom. Usually that will take enough pressure off of the pins that they will come out. Once in a while, there will be a side to side bind, if there is you may need to pressure down one leg or the other to off set the bind. Try it both ways, everything up or leg to leg to see which way works best with your tractor. What I have described above is what I have observed from the small removable backhoes that I have either owned or worked on.
JerryG
Super Member
The backhoe will need the legs and the boom up normally. If it still binds you can stretch out the boom. Usually that will take enough pressure off of the pins that they will come out. Once in a while, there will be a side to side bind, if there is you may need to pressure down one leg or the other to off set the bind. Try it both ways, everything up or leg to leg to see which way works best with your tractor. What I have described above is what I have observed from the small removable backhoes that I have either owned or worked on.
