Getting a Flashing code on a 2003 110 John Deere backhoe

[LANGFORD]

As the title says ,I am getting a flashing code that seem to indicate something wrong with the engine speed sensor. So I am getting loss of performance. Manual suggest :get single in range :cycle controller power to clear
Any thoughts how to do this.
Thanks

 

[beenthere]

Any typo's in that suggestion from the manual?
And do you have the service technical manual or just the operator's manual?

 

[disney]

what is the code sequence? maybe one of us could look it up for you.

 

[kennyd]

There are lots of threads about those sensors failing, best to just replace it I think.

http://www.tractorbynet.com/forums/...rating/222695-john-deere-110-tlb-surging.html

http://www.tractorbynet.com/forums/...35-110tlb-bucking-violently-any-thoughts.html

http://www.tractorbynet.com/forums/john-deere-owning-operating/211469-2002-jd-110-tlb.html

 

[LANGFORD]

OK It was suggested to disconnect the battery. I did for over a Hr the result is the flashing code stopped. Hope that will be the end of it.

 

[GreatWhitehunter]

Replace the flywheel sensor and your issue should go away. The original deere part number has changed but I believe I noted that in a thread on the issue. It isn't one of the ones Kenny linked so just search my username. I also included a pic of the sensor and its location.

Matt