glow coil question -

   / glow coil question -
  • Thread Starter
#21  
thanks Dave -
yes, I was surprised too. But that what it is. I hear what you're saying, but why would a intake air heater run through a dash mounted glow coil?
here are some pics
glowcoil.JPG

glowplug.JPG

Thanks again ....
 
   / glow coil question -
  • Thread Starter
#22  
thanks Dave -
yes, I was surprised too. But that what it is. I hear what you're saying, but why would a intake air heater run through a dash mounted glow coil?
here are some pics
glowcoil.JPG

glowplug.JPG

Thanks again ....
 
   / glow coil question - #23  
Just an FYI, the glow plugs for my old Ford 4 cyl read about 0.2 - 0.3 ohms and draw 40-50 amps each.

online at www.sparkplugs.com have glow plugs. If you have a number, they may be able to cross it. But not cheap! $31 each for mine...

jb

jb
 
   / glow coil question - #24  
Just an FYI, the glow plugs for my old Ford 4 cyl read about 0.2 - 0.3 ohms and draw 40-50 amps each.

online at www.sparkplugs.com have glow plugs. If you have a number, they may be able to cross it. But not cheap! $31 each for mine...

jb

jb
 
   / glow coil question - #25  
I guess I'm confused, but that looks like a picture of an oil pressure switch, or at least that's what it looks like to me.
 
   / glow coil question - #26  
I guess I'm confused, but that looks like a picture of an oil pressure switch, or at least that's what it looks like to me.
 
   / glow coil question - #27  
"I guess I'm confused, but that looks like a picture of an oil pressure switch, or at least that's what it looks like to me."

I'm confused also. I, too, only see an oil pressure switch.
 
   / glow coil question - #28  
"I guess I'm confused, but that looks like a picture of an oil pressure switch, or at least that's what it looks like to me."

I'm confused also. I, too, only see an oil pressure switch.
 
   / glow coil question - #29  
The glow plugs are on the head somewhere screwed into the combustion chamber. They may not have a wire going from plug to plug but should have a bar. There is a wire going to the rear glow plug. I just took mine out, held them with a set of pliers and turned the key. Of course I had them all still connected electrically. They will get hot quick. If they don't they could be bad.
 
   / glow coil question - #30  
The glow plugs are on the head somewhere screwed into the combustion chamber. They may not have a wire going from plug to plug but should have a bar. There is a wire going to the rear glow plug. I just took mine out, held them with a set of pliers and turned the key. Of course I had them all still connected electrically. They will get hot quick. If they don't they could be bad.
 

Tractor & Equipment Auctions

New Wolverine72 In Skid Steer Brush Cutter (A53002)
New Wolverine72 In...
43011 (A51691)
43011 (A51691)
New Wolverine Skid Steer 3pt Hitch Quick Connect (A53002)
New Wolverine Skid...
(1) 14ft Tarter Gate (A51573)
(1) 14ft Tarter...
Auger Skid Steer Attachment (A50322)
Auger Skid Steer...
(1) 14ft Tarter Gate (A51573)
(1) 14ft Tarter...
 
Top