Glow plug controller-l3600gst

[kongmen]

Can someone tell me which one out of the three units is the glow plug controller. I have read the threads on this subject and I also have the dash apart right now. All three units are on the right side and the previous owner replaced the relay on the front side and the way I understand it one of the two on the back side is the controller. If someone knows which unit is the controller I will try and replace it. I know one member used an aftermarket switch to manually power the glow plugs but unless he can send me a detailed how to I will stick with replacing the controller. The way I see it if the controller don't fix it I have three more possibilities glow plugs,engine temp sensor, timer. I just bought this tractor and will be purchasing the service and parts manual.


Kenny v I sent you a pm to see if you would consider selling your manuals to this tractor. Thanks.

 

[Kenonf]

It just so happens i have the old glow plug controller from my l4200 dt sitting here on my desk. Mine was not on the firewall but on a metal brace that was close in location to the glow plug relay which was on the firewall. It is labeled NGK spark plug co. DC12V
164156661 S33NH

 

[Kenonf]

oops here is the pic

 

[KennyV]

Kenny v I sent you a pm to see if you would consider selling your manuals to this tractor. Thanks.

I did not receive any PM...
But to answer your question.. can't sell manuals, I need to refer to them now & then myself.
If you need anything in particular let me know and I will scan and email to you.... KennyV
PS I see Kenonf covered your main question.

 

[kongmen]

Thanks fellas, hopefully mine will say the same thing and look the same as that one (will have to look this weekend).

Kenny that's understandable, I just had to ask before I ordered it on line. Wonder why the pm didn't go trough though?

 

[kongmen]

The controller was the problem on mine to. :thumbsup: