Good morning!!!!

[toppop52]

Check valves are an added safety feature that keep the cylinder locked in position and prevent drift.

I understand a check valve, but doesn’t that limit you to one direction? I use my flow control to limit drop speed on the three point, but I don’t have my hydraulic links yet, and won’t for a couple of months.

 

[lostcreekranch]

Check valves are an added safety feature that keep the cylinder locked in position and prevent drift.

Do you think your "drift" is caused by your T/T cylinders or ... fluid bypassing inside the remote valve block?

 

[ronjhall]

Do you think your "drift" is caused by your T/T cylinders or ... fluid bypassing inside the remote valve block?

Bypassing remote valve.

 

[LouNY]

They are talking about pilot checks, they have minimal leakage past them when the SCV is in neutral, when the SCV is activated the pressure to the cylinder to operate it also opens the piloted check to allow fluid to flow to the return path. The SCV's have some leakage which would allow the unchecked cylinder to travel undesirably.

 

[toppop52]

They are talking about pilot checks, they have minimal leakage past them when the SCV is in neutral, when the SCV is activated the pressure to the cylinder to operate it also opens the piloted check to allow fluid to flow to the return path. The SCV's have some leakage which would allow the unchecked cylinder to travel undesirably.

Thank you, that’s what I was looking for.

 

[buckeyefarmer]

Beginning to look a lot like Christmas.

 

[Buppies]

BEF looked like you this morning now mostly gone high of 45 windy now

 

[Steppenwolfe]

Im still looking at either nautilus R616 or Schwinn 270.

Gotchya... Mine is a BH Fitness LK 54 | fitness-distributors $750.00 new. They are commercial gym models.

 

[txdon]

Ahh the bead of grease forming in the cleaned out joint, a pretty sight. I followed LouNY advice and took out the zerK (zerk itself was not clogged) and cleaned the grease from the joint, sprayed it with carburetor cleaner (we don't have brake cleaner) moved the bucket back and forth, repeat 3 times, reassemble and the grease bead appears. Thanks.

 

[lostcreekranch]

Ahh the bead of grease forming in the cleaned out joint, a pretty sight. I followed LouNY advice and took out the zerK (zerk itself was not clogged) and cleaned the grease from the joint, sprayed it with carburetor cleaner (we don't have brake cleaner) moved the bucket back and forth, repeat 3 times, reassemble and the grease bead appears. Thanks.
View attachment 635980

That's good news Don.