Good morning!!!!

[Kyle_in_Tex]

"I decided to clean the north side of my metal barn today. I did not want to use a bleach solution, for fear of accelerating rust. So I just mixed some simple green with some water and sprayed it on. It helped, but not nearly as efficient as the Jomax/Bleach solution. My arms got tired from all the pressure washing up high on the ladder."

Have you ever tried Wet & Forget Kyle? No rinsing, no bleach. It doesn't work fast but, does keep surfaces clean for a long time.

View attachment 645218

I use it with my pressure washer foam gun.

I'll bet it works good. Make sure you cover up well when spraying it. That's some pretty tough stuff. Here is the SDS sheet.

https://www.wetandforget.com/downloads/SDS_USA_Wet_Forget_9.9_12282019.pdf

Here is the active ingredient:
Akyld Dimethylbenzylammonium chloride
I believe it to be quite corrosive, but I will defer to any chemical peeps out there.

Need to make a quick run to Walmart.

BEF, I'm finding out that many, many have read it.

Don's rumor may be correct, Austin has verified 2 people with the virus.

 

[Kyle_in_Tex]

"I decided to clean the north side of my metal barn today. I did not want to use a bleach solution, for fear of accelerating rust. So I just mixed some simple green with some water and sprayed it on. It helped, but not nearly as efficient as the Jomax/Bleach solution. My arms got tired from all the pressure washing up high on the ladder."

Have you ever tried Wet & Forget Kyle? No rinsing, no bleach. It doesn't work fast but, does keep surfaces clean for a long time.

View attachment 645218

I use it with my pressure washer foam gun.

I'll bet it works good. Make sure you cover up well when spraying it. That's some pretty tough stuff. Here is the SDS sheet.

https://www.wetandforget.com/downloads/SDS_USA_Wet_Forget_9.9_12282019.pdf

Here is the active ingredient:
Akyld Dimethylbenzylammonium chloride
I believe it to be quite corrosive, but I will defer to any chemical peeps out there.

Need to make a quick run to Walmart.

BEF, I'm finding out that many, many have read it.

Don's rumor may be correct, Austin has verified 2 people with the virus.

 

[wngsprd]

Spray it on but, DO NOT rinse it off. The W&F has a residual effect. In a pump up sprayer mix it 1 part W&F to 5 parts water.

I use my PW Foam gun to treat 2nd story from the ground.

MATCC Foam Wash Gun 3000 PSI High Pressure Washer Jet Snow Foam Lance Foam Cannon Foam Blaster with 3/8" Connector Amazon.com: MATCC Foam Wash Gun 3 PSI High Pressure Washer Jet Snow Foam Lance Foam Cannon Foam Blaster with 3/8" Connector: Automotive

It has variable ratio and pattern control

I'm a happy user of W&F, too. Bought a 2 pack at Costco a year or so ago.

 

[Buppies]

If I recall when WWII started we as a country were ill prepared. When Japan bombed Pearl Harbor one out our lowest points. In less than four years we were a manufacturing giant. We are in a serious battle with this virus my bet is with everyone working for a common goal we will rise from this even stronger than before. But we must work together. Enough of my soap box

 

[Kyle_in_Tex]

"I decided to clean the north side of my metal barn today. I did not want to use a bleach solution, for fear of accelerating rust. So I just mixed some simple green with some water and sprayed it on. It helped, but not nearly as efficient as the Jomax/Bleach solution. My arms got tired from all the pressure washing up high on the ladder."

Have you ever tried Wet & Forget Kyle? No rinsing, no bleach. It doesn't work fast but, does keep surfaces clean for a long time.

View attachment 645218

I use it with my pressure washer foam gun.

I'll bet it works good. Make sure you cover up well when spraying it. That's some pretty tough stuff. Here is the SDS sheet.

https://www.wetandforget.com/downloads/SDS_USA_Wet_Forget_9.9_12282019.pdf

Here is the active ingredient:
Akyld Dimethylbenzylammonium chloride
I believe it to be quite corrosive, but I will defer to any chemical peeps out there.

Need to make a quick run to Walmart.

BEF, I'm finding out that many, many have read it.

Don's rumor may be correct, Austin has verified 2 people with the virus.

I'm a happy user of W&F, too. Bought a 2 pack at Costco a year or so ago.

Read #12 , if you have a pond or birds nearby.

 

[wngsprd]

Dr. Siegel gave a Covid 19 update this morning...good news vs. other info I had heard. C19 can live on:
- plastics - 2 to 3 days
- wood - 1 day
- metal - 3 to 4 hours
But it only remains viable (able to infect you) for about 8 hours.

Humidity and UV sunlight, as we get in summer helps since the humidity helps your membranes protect, and sunlight helps kill virus.

 

[lostcreekranch]

Dr. Siegel gave a Covid 19 update this morning...good news vs. other info I had heard. C19 can live on:
- plastics - 2 to 3 days
- wood - 1 day
- metal - 3 to 4 hours
But it only remains viable (able to infect you) for about 8 hours.

Humidity and UV sunlight, as we get in summer helps since the humidity helps your membranes protect, and sunlight helps kill virus.

Many folks suffer from allergies this time of year, with similar symptoms, which could put extra pressure on medical facilities .

 

[Buppies]

Thanks for sharing wngsprd

 

[Buppies]

Agree Rick

 

[Looking4new]

I wished you lived closer too, Ron; I'm down to only 12 rolls of toilet paper!:laughing:

Got any maple trees? Oak leaves are good too.