Good morning!!!!

   / Good morning!!!! #178,121  
62AD9B44-5BDC-478D-A3B7-FC12B410F3B5.jpeg
 
   / Good morning!!!! #178,122  
Good Afternoon Guys,
Scootr, best of luck with surgery!!

RNG, I bought a Craftsman pressure washer with the Honda GCV engine a few years back ! I think around 3000 psi, have had good luck with it so far ! I am partial to Honda engines, pressure washer, log splitter and portable generator ! They need to start without too much pulling ! 😉

Beautiful day, have a great afternoon !
 
   / Good morning!!!! #178,123  
68°F and .01 inches rain

No clue what I might get into today.
first off is appointment with eye doctor if I get dilated that’s pretty much it as it takes me all day to recover.

Zoom Happy Hour this afternoon.

Prayers for all
Be safe
Have a great day
 
   / Good morning!!!! #178,125  
...
first off is appointment with eye doctor if I get dilated that’s pretty much it as it takes me all day to recover.
...
There is a eye drop coming on the market soon to reverse medically induced dilation.

I have been watching that space for over 20 years.
 
   / Good morning!!!! #178,128  
if at first you don't succeed, do it three times.
that's how my morning went.
Started off greasing the spindles, then put the new blades on
but the deck was so clogged with wet grass I couldn't leave it that way so made a big mess with that.
then took mower outside and degreased/cleaned/powerwashed the mower deck.
looking spiffy, blew it all off with air and decided to run the blades to dry everything out.
wack wack wack wack
sigh
I realize the new blades don't fit the same way, and took one off to compare with old one.
Aha, different size center hole, new one about 1/16 too small. So blade was not seating properly.
Ok, jack up the mower for second time and replace with spare set of sharpened blades.
take it outside to check and
wack wack wack wack

now I had lost my sense of humor.
went inside for some lunch to regain it, came back out,
jacked it up again, and
got it all installed properly and it ran fine.
had to be careful in jacking, tire kept trying to climb out, got it put back in where it belonged

sat outside for a few moments and watched stink bugs run along rv window.
 

Attachments

  • IMG_2381.JPG
    IMG_2381.JPG
    2.8 MB · Views: 162
  • IMG_2380 - Copy.JPG
    IMG_2380 - Copy.JPG
    2.3 MB · Views: 108
  • IMG_2379 - Copy.JPG
    IMG_2379 - Copy.JPG
    2.4 MB · Views: 113
  • IMG_2378 - Copy.JPG
    IMG_2378 - Copy.JPG
    2.4 MB · Views: 219
  • IMG_2374.JPG
    IMG_2374.JPG
    1.2 MB · Views: 113

Tractor & Equipment Auctions

2022 John Deere 4052M MFWD Compact Utility Tractor with 400E loader - Bucket, Forks and Grapple (A55314)
2022 John Deere...
Galvanized Livestock Wire Gate - 4FT x 11.5FT (A56436)
Galvanized...
2017 Ford F-350 Flatbed Truck (A56858)
2017 Ford F-350...
Vermeer Mixing System with Hose Reel (A55973)
Vermeer Mixing...
MARATHON 25KW GENERATOR (A58214)
MARATHON 25KW...
2014 Freightliner M2 106 5.1Yds Asphalt Pot Hole Patcher Truck (A56858)
2014 Freightliner...
 
Top