Got my new 3720

   / Got my new 3720 #1  

jrz1

New member
Joined
Sep 22, 2006
Messages
8
Haven't had much time to use it. Got the tractor, 300x FEL with 4n1 bucket (not a JD) and the MX5 bush cutter. Will try to take some time this weekend to give it a work out - especially the bucket. Want to get good at grabbing things with the 4n1. Got lots of piles of cut trees/shrubs that I want to move to burn and they're probably loaded with snakes so I'm doing it with the tractor. Amazing how small it seems after I only rode it for 1-2 hours. So far so good. Love the power and the tight turning circle.
 
   / Got my new 3720 #2  
Very cool... enjoy it and be sure your ballast is rigged up... oh, and try not to get it to dirty. Love the look of the pretty clean machines... ;)

How about some pics... :)
 
   / Got my new 3720
  • Thread Starter
#3  
Dealer filled tires with something for ballast. Seems to be pretty stable but I haven't really lifted much with the FEL. Just a little bit of dirt and some rocks. Also had the MX5 in back to balance things. Hard to keep it clean when bush hogging (my first time). Crap flys everywhere - seeds etc.; just that time of year I guess. I'm really digging it though. Actually looking forward to getting out and cutting the grass/brush etc. I'm sure that won't last forever but then maybe I can get my son to do it in a few years!
 
   / Got my new 3720 #4  
jrz1 said:
Haven't had much time to use it. Got the tractor, 300x FEL with 4n1 bucket (not a JD) and the MX5 bush cutter. Will try to take some time this weekend to give it a work out - especially the bucket. Want to get good at grabbing things with the 4n1. Got lots of piles of cut trees/shrubs that I want to move to burn and they're probably loaded with snakes so I'm doing it with the tractor. Amazing how small it seems after I only rode it for 1-2 hours. So far so good. Love the power and the tight turning circle.

So you have the 300X or 300CX loader? If 300X do you have the loader mounted hard lines for the 3rd function or how do you connect up the hydraulic linse for the bucket cylinders?
 
   / Got my new 3720
  • Thread Starter
#5  
BloomingtonMike said:
So you have the 300X or 300CX loader? If 300X do you have the loader mounted hard lines for the 3rd function or how do you connect up the hydraulic linse for the bucket cylinders?

I'd have to take a closer look at it to answer your question. Won't be til Friday or Saturday. Tractor is at some land that i bough south of town. Dealer installed the loader/bucket. It is the 300x though.
 
   / Got my new 3720 #6  
jrz1 said:
I'd have to take a closer look at it to answer your question. Won't be til Friday or Saturday. Tractor is at some land that i bough south of town. Dealer installed the loader/bucket. It is the 300x though.

Just curious. The JD oil line kit is for the 300CX but I got it to work with my 300X, Doubt a dealer would do what I did though. Please let me know the solution they choose for you.

BTW - you just bought an absolutly awesome tractor. Congrats.
 
   / Got my new 3720 #7  
Congrats on your new tractor. Got mine 1 month ago. Great engine power. You will love it.
 

Tractor & Equipment Auctions

2017 Ford F-450 Crew Cab Mason Dump Truck (A50323)
2017 Ford F-450...
2012 SULLIVAN PALATEK AIR COMPRESSOR (A51222)
2012 SULLIVAN...
SDLG WHEEL LOADER FORKS MAST W/ 48" FORKS (A51242)
SDLG WHEEL LOADER...
2017 NISSAN NV200 VAN (A51406)
2017 NISSAN NV200...
2000 GMC C7500 ANCHOR DRILLING TRUCK (A50854)
2000 GMC C7500...
2016 Ford Escape SUV (A50324)
2016 Ford Escape...
 
Top