GPM required to run mini-ex mulcher?

[Carl_NH]

MIke - the Tak 280 specs show two hard lines on the stick - the primary at 39GPM and secondary at 15 GPM so should be fine running a mulching head on the primary.

 

[Fixastuff]

My 260 runs a hammer flail pretty darn good.

 

[Hay Dude]

So the Tak 280 has a weld patch on the lower dipper. I’m not too fond of those. Seller says he would take 25K….
Looking at a Wacker Neuson 8003-2, 18,000lb machine today.

 

[hayden]

I have 3 primary needs:
Digging rocks out of fields.
Clearing fence lines and field edges.
Loading cut logs into truck.

I think this will make my life a lot easier, but then there’s that old pesky problem of parting with the money. This has been on my “list” for 5 years.

Don't forget transportation. I suspect you drive your tractor to most jobs? If you are set up for trailering then you are all set, but it's not practical to track an excavator very far.

 

[Hay Dude]

Don't forget transportation. I suspect you drive your tractor to most jobs? If you are set up for trailering then you are all set, but it's not practical to track an excavator very far.

I have a 38,500lb GVWR trailer.
Also have air brake dump truck to haul it.
I’m good.

 

[hayden]

I have a 38,500lb GVWR trailer.
Also have air brake dump truck to haul it.
I’m good.

I could use one of those