GPM required to run mini-ex mulcher?

   / GPM required to run mini-ex mulcher? #21  
MIke - the Tak 280 specs show two hard lines on the stick - the primary at 39GPM and secondary at 15 GPM so should be fine running a mulching head on the primary.
 
   / GPM required to run mini-ex mulcher? #22  
My 260 runs a hammer flail pretty darn good.
 
   / GPM required to run mini-ex mulcher?
  • Thread Starter
#23  
So the Tak 280 has a weld patch on the lower dipper. I’m not too fond of those. Seller says he would take 25K….
Looking at a Wacker Neuson 8003-2, 18,000lb machine today.
 
Last edited:
   / GPM required to run mini-ex mulcher? #24  
I have 3 primary needs:
Digging rocks out of fields.
Clearing fence lines and field edges.
Loading cut logs into truck.

I think this will make my life a lot easier, but then there’s that old pesky problem of parting with the money. This has been on my “list” for 5 years.
Don't forget transportation. I suspect you drive your tractor to most jobs? If you are set up for trailering then you are all set, but it's not practical to track an excavator very far.
 
   / GPM required to run mini-ex mulcher?
  • Thread Starter
#25  
Don't forget transportation. I suspect you drive your tractor to most jobs? If you are set up for trailering then you are all set, but it's not practical to track an excavator very far.
I have a 38,500lb GVWR trailer.
Also have air brake dump truck to haul it.
I’m good.
 
   / GPM required to run mini-ex mulcher? #26  

Tractor & Equipment Auctions

2757 (A55758)
2757 (A55758)
1840 (A51248)
1840 (A51248)
2015 Ford F-150 Ext. Cab Pickup Truck (A53422)
2015 Ford F-150...
Toro Mower (A50324)
Toro Mower (A50324)
GOODYEAR SET OF 12.4/11-24 TIRES WITH 5 BOLT HUB WHEELS (80% TREAD) (A55301)
GOODYEAR SET OF...
49" X 79" EXPANDED METAL RAMP GATE (A54756)
49" X 79" EXPANDED...
 
Top