Grapple/Loader Problem

   / Grapple/Loader Problem #1  

Catchthedig

New member
Joined
Nov 20, 2021
Messages
19
Location
Hudson Valley NY
Tractor
John Deere 950
Got this land clearing problem. Need help clearing brush and cut logs (without leaving the tractor seat). Tractor JD 950 4wd with Woods 2012 loader with 5 ft bucket. Bucket has a brush bar mounted at lower front edge with six 24-inch tines at 1 ft spacing. Great for scooping up stacked piles of brush or moderate piles of 6-10 inch logs.. Bad for moving over rough ground for disposal. (The load spills off the bucket/brush forks.) What I need is some kind of (grapple-style) hydraulic overhead rack or thumb to hold the load down Anybody got any suggestions ?
 
   / Grapple/Loader Problem #2  
There's quite a few add on kits out there for buckets to add a grapple lid or thumb. Wouldn't be exceptionally hard to fabricobble but would probably take some time.
 
   / Grapple/Loader Problem #3  
Whatever you get, be apprised you'll need a 3rd function on the loader to operate it.
 

Tractor & Equipment Auctions

2008 Ford F-250 Service Truck with Liftgate (A48081)
2008 Ford F-250...
2008 Ford F-750 Crew Cab Pro Patch TCM-425-135 Asphalt Patcher Truck (A48081)
2008 Ford F-750...
2010 Toyota Camry Sedan (A48082)
2010 Toyota Camry...
2022 Chevrolet Tahoe SUV (A48082)
2022 Chevrolet...
2013 Ford F-150 4x4 Ext. Cab Pickup Truck (A48081)
2013 Ford F-150...
Selco V5-HD Vertical Hydraulic Baler (A49346)
Selco V5-HD...
 
Top