rustyjeep
Bronze Member
- Joined
- Aug 17, 2006
- Messages
- 62
- Location
- Jessieville,Arkansas
- Tractor
- IH 484,IH 424,Mahindra 7520 4wd
I think it gives it character nobody has one just like it!!
Grapple work casualty
- Thread starter AirForceIP
- Start date
- Views: 9341
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,998
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
Spyder: Safety glasses are not enough for grinding. If you've ever seen what can happen when a piece of disintergrating grinding disc hits someone in the face, you wont every use a grinder again without faceshield and safety glasses. Lets dont even speak about the shorts and sleevless shirt. I suspect that they had to take that shot quickly before she jumped around slapping off those sparks on that bare skin.
I wish that the Orange county chopper guys would show more safety in their workshop. It give a bad example to folks watching that when they weld in t-shirts and no gloves, grind with little to no eye protection. For the novice that thinks he can do the same thing for hours, he is looking for at a minimum of a bad UV burn and hopefully no eye injury.
I wish that the Orange county chopper guys would show more safety in their workshop. It give a bad example to folks watching that when they weld in t-shirts and no gloves, grind with little to no eye protection. For the novice that thinks he can do the same thing for hours, he is looking for at a minimum of a bad UV burn and hopefully no eye injury.
ENG18LT
Platinum Member
And the Safety Patrol strikes again. 
