I've got a standard manual grease gun with a short pipe (~1") and want to replace it with longer one. I've tried to remove it, but it is stuck. I decided to either get 2 small nuts and twist them on against one another then use a wrench on the inner one to unscrew pipe or get a connecting nut to just add the extension. I can't determine the thread size on the pipe. Closest I've come to getting a match is an M10-1.0, but even that binds up after about 3 turns. Anyone know what the thread size is on standard grease gun fittings?
Grease gun thread size?
- Thread starter PETDOC
- Start date
- Views: 1723
TractorGuy
Elite Member
- Joined
- Sep 15, 2013
- Messages
- 4,616
- Location
- N. FL
- Tractor
- John Deere 4410, John Deere 4120, Kubota LX3310 cab, John Deere F725 Front Mount Mower, Swisher 60" pull behind mower. John Deere 4310 CUT (sold), Ford New Holland 575E Cab Backhoe (sold).
1/8" NPT
DLTTrekkers
Veteran Member
And its taper !
WranglerX
Super Member
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,190
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
NPT is tapered by definition.
DLTTrekkers
Veteran Member
Thanks RickB...never to old to learn !
