Flail Mower H-40 Befco offset flail needs help

   / H-40 Befco offset flail needs help #1  

BRUSHTAMERS

Silver Member
Joined
Aug 21, 2003
Messages
116
Location
N.W. Oregon
Tractor
Montana 5740 C
I've run flails before, but this one is driving me nuts. On anything but the most level ground, it either scalps, or skips. Have tried every position on the top link of the tractor,( 3 positions), and both positions of the mower top link( 2 positions) This mower doesn't have skids, but I just can't imagine that it would make that much differance. Friend of mine suggested adjustable helper wheels on the front of the mower, sounds very reasonable, just set to the lowest setting on the three point, and let it follow behind me. Now it's time for you guys to tell me it can't be done, and why? And if I can, how? I'll tell you now, Befco has not been a lot of help.
 
   / H-40 Befco offset flail needs help #2  
You said it does not have skids but does it have the rear roller. I would imagine that if the mower does not have any way to follow the ground, and is only relying on the position of the 3 point, then it would not do a good job. web page

J.D.
 
   / H-40 Befco offset flail needs help #3  
Have you tried running the mower with the 3 pt hitch slightly raised and a lenghtened top link so that it points slightly up in the front. This I believe would allow it to ride on the rear roller and follow the ground contour, just as a Bus Hog type mower does.

Andy
 
 

Tractor & Equipment Auctions

2008 CATERPILLAR 304C CR EXCAVATOR (A51242)
2008 CATERPILLAR...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2022 INTERNATIONAL MV607 26FT BOX TRUCK (A51222)
2022 INTERNATIONAL...
2017 Claas Jaguar 860 Forage Harvester (A51039)
2017 Claas Jaguar...
2016 J&M 1122-20T X-Tended Grain Cart (A50657)
2016 J&M 1122-20T...
1262 (A50490)
1262 (A50490)
 
Top