Harbor Freight Metal Cut off Saw - Opinions?
- Thread starter Pooh_Bear
- Start date
- Views: 20503
srjones
Platinum Member
- Joined
- Mar 6, 2006
- Messages
- 542
- Location
- Columbia County, Oregon, USA
- Tractor
- Mahindra 2015HST & Mitsubish R1500
</font><font color="blue" class="small">( Would there be any reason a chop blade couldn't be put on a power mitre saw just for occasional use with smaller stock? )</font>
It will work. HOWEVER /forums/images/graemlins/smile.gif
If you want to keep iron particals from staining the wood you're working on, you'll need to carefully clean the chopsaw when switching back to the wood blade. Also, the wood miter saws don't have the built in clamp to hold the workpeice, so you pretty much need welding gloves (or a high tolerance of pain) to make cuts this way.
These are the main reason's I'm looking getting a dedicate machine to do this. That, and it's a big pain to switch back and forth.
It will work. HOWEVER /forums/images/graemlins/smile.gif
If you want to keep iron particals from staining the wood you're working on, you'll need to carefully clean the chopsaw when switching back to the wood blade. Also, the wood miter saws don't have the built in clamp to hold the workpeice, so you pretty much need welding gloves (or a high tolerance of pain) to make cuts this way.
These are the main reason's I'm looking getting a dedicate machine to do this. That, and it's a big pain to switch back and forth.
have_blue
Veteran Member
Either saw will last a long time if you don't bog the motor down. Bog it down, it gets hot and melts something. Let the blade spin free, be patient, and you'll get 3x your money's worth.
