Quick Hitches harbor freight quick hitch
- Thread starter escavader
- Start date
- Views: 12821
-
- Tags
- quick hitch
bjr
Veteran Member
From what I've read, no one has had to repsition the top hole of the implemnts. That was the issue I'e had. to get the top hook to settle in the bottom of the hook I had move the implement top hole up or down. But, other than that I like the HF QH. I did bend the bottom hooks on one side of the hitch while turning with a box blade on the hitch. bjr
hdbikercouple
Bronze Member
yes, i had to rework the top hook to lower it. then i went and redid all of my work tools (toys) for the back so they are all the same . for all you bx owners I'm looking at how close it is to the fel size. going to have to add , move the top link bar lower, and spread the bottom width about 1 " . I think I'm going to get another and make the fel a qa . then it would be easy to change bucket ,snow plow, pallet focks . and maybe make a grapple.
California, what size are the rear tires on your Yanmar? I have YM2500 with 11.2X24 and want to replace with bigger tires. Mine is also 2wd. wonder how big I can go? I know I can go up 1 size to 12.4 X 24, but might like even bigger. thanks so much.
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 16,588
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
Those are 12.4 x 24 tires on the correct width rims (I think 11 inches wide). When I went to add the ROPS, I noticed spacers that raise the fenders up. I think the spacers were put on because of the oversize tires. There are pictures of the fender spacers in this old thread I posted about the ROPS. http://www.tractorbynet.com/forums/yanmar/75272-rops-ym240-ym2000-pictures.htmltmar04 said: