Harbor Freight quick hitch???
- Thread starter jand38
- Start date
- Views: 4414
-
- Tags
- quick hitch
project_X
Gold Member
FWIW, I ordered mine on May 12th, got the initial reply and then nothing. When I called the other day, they said it was shipped on May 31st and I would see it in the next 10 days.
My mailbox is across the border in Ogdensburg,NY, I will check with them tomorrow to see if it has arrived yet.
Cheers,
Rob
My mailbox is across the border in Ogdensburg,NY, I will check with them tomorrow to see if it has arrived yet.
Cheers,
Rob
project_X
Gold Member
FWIW, I ordered mine on May 12th, got the initial reply and then nothing. When I called the other day, they said it was shipped on May 31st and I would see it in the next 10 days.
My mailbox is across the border in Ogdensburg,NY, I will check with them tomorrow to see if it has arrived yet.
Cheers,
Rob
My mailbox is across the border in Ogdensburg,NY, I will check with them tomorrow to see if it has arrived yet.
Cheers,
Rob
Brad_Blazer
Veteran Member
A hint for Harbor Freight - if you see an advertisement for a lower price after you place your order, you can call them and they will give you a price adjustment. It works whether it's on back order or after you've had the item for several months.
Brad_Blazer
Veteran Member
A hint for Harbor Freight - if you see an advertisement for a lower price after you place your order, you can call them and they will give you a price adjustment. It works whether it's on back order or after you've had the item for several months.
npaden
Platinum Member
I ordered mine when the last post went around on them in mid-May.
Just got it in this morning. I'll try to hook it up tonight and take some pictures.
Just got it in this morning. I'll try to hook it up tonight and take some pictures.
npaden
Platinum Member
I ordered mine when the last post went around on them in mid-May.
Just got it in this morning. I'll try to hook it up tonight and take some pictures.
Just got it in this morning. I'll try to hook it up tonight and take some pictures.
PAB_OH
Platinum Member
Yea, please do. I am contemplating one of these and I'd like to see some pics if you get a chance.
PAB_OH
Platinum Member
Yea, please do. I am contemplating one of these and I'd like to see some pics if you get a chance.
Bedlam
Veteran Member
- Joined
- Feb 28, 2005
- Messages
- 1,883
Just checked mine online. Thanks to the posts here, I see they do it online now. I didnt know that in the past.
Anyway it says shipped May 30 2006..
My carge acct reflects it also.
Via Fed Ex.
I assume its on the way. Ill take a few pics when it comes in. Thanks to the poster about getting a price adjustment. I ordered a compressor, and It went on sale that same afternoon, I called but they said I could only refuse it when it arrived. So I ordered the other one ant the 20 dollar less amount, and when the first one came in I sent it back and kept the second. Sure didnt seem to make sence tho.given the shipping. But thats what they wanted.They do seem to be making some progress in getting better. I just except that the quality isnt alwasy there and Ill have to rebuilt and re weld alot of the stuff.
Good luck to all. It will be interesting to see who gets theirs first.
Allan
Anyway it says shipped May 30 2006..
My carge acct reflects it also.
Via Fed Ex.
I assume its on the way. Ill take a few pics when it comes in. Thanks to the poster about getting a price adjustment. I ordered a compressor, and It went on sale that same afternoon, I called but they said I could only refuse it when it arrived. So I ordered the other one ant the 20 dollar less amount, and when the first one came in I sent it back and kept the second. Sure didnt seem to make sence tho.given the shipping. But thats what they wanted.They do seem to be making some progress in getting better. I just except that the quality isnt alwasy there and Ill have to rebuilt and re weld alot of the stuff.
Good luck to all. It will be interesting to see who gets theirs first.
Allan
Bedlam
Veteran Member
- Joined
- Feb 28, 2005
- Messages
- 1,883
Just checked mine online. Thanks to the posts here, I see they do it online now. I didnt know that in the past.
Anyway it says shipped May 30 2006..
My carge acct reflects it also.
Via Fed Ex.
I assume its on the way. Ill take a few pics when it comes in. Thanks to the poster about getting a price adjustment. I ordered a compressor, and It went on sale that same afternoon, I called but they said I could only refuse it when it arrived. So I ordered the other one ant the 20 dollar less amount, and when the first one came in I sent it back and kept the second. Sure didnt seem to make sence tho.given the shipping. But thats what they wanted.They do seem to be making some progress in getting better. I just except that the quality isnt alwasy there and Ill have to rebuilt and re weld alot of the stuff.
Good luck to all. It will be interesting to see who gets theirs first.
Allan
Anyway it says shipped May 30 2006..
My carge acct reflects it also.
Via Fed Ex.
I assume its on the way. Ill take a few pics when it comes in. Thanks to the poster about getting a price adjustment. I ordered a compressor, and It went on sale that same afternoon, I called but they said I could only refuse it when it arrived. So I ordered the other one ant the 20 dollar less amount, and when the first one came in I sent it back and kept the second. Sure didnt seem to make sence tho.given the shipping. But thats what they wanted.They do seem to be making some progress in getting better. I just except that the quality isnt alwasy there and Ill have to rebuilt and re weld alot of the stuff.
Good luck to all. It will be interesting to see who gets theirs first.
Allan
npaden
Platinum Member
Yes, I got my gloves last week and then the hitch came this week.
I posted this on the other thread and will post again on this thread.
Okay, I took some pictures tonight and will post them. I resized them and put them on low quality so they shouldn't be too big to load even for dial up folks.
The hydraulic oil puddle is from a leak on a fitting on my loader the other day so please ignore that. I didn't feel like moving the tractor to a clean cement area just to take pictures.
It went on pretty easy. Probably about 15 minutes total time by myself. I double checked all my implements and it should work for all of them except maybe my larger disc that was setup as a cat 2 originally.
It seems pretty heavy duty and overall I think it is well worth the $69.99.
Now for the pictures. I won't win any photography awards but you can get the general idea.
This closeup picture of the toplink is pretty blurry but you can still get the general idea.
FWIW, Nathan
I posted this on the other thread and will post again on this thread.
Okay, I took some pictures tonight and will post them. I resized them and put them on low quality so they shouldn't be too big to load even for dial up folks.
The hydraulic oil puddle is from a leak on a fitting on my loader the other day so please ignore that. I didn't feel like moving the tractor to a clean cement area just to take pictures.
It went on pretty easy. Probably about 15 minutes total time by myself. I double checked all my implements and it should work for all of them except maybe my larger disc that was setup as a cat 2 originally.
It seems pretty heavy duty and overall I think it is well worth the $69.99.
Now for the pictures. I won't win any photography awards but you can get the general idea.
This closeup picture of the toplink is pretty blurry but you can still get the general idea.
FWIW, Nathan
npaden
Platinum Member
Yes, I got my gloves last week and then the hitch came this week.
I posted this on the other thread and will post again on this thread.
Okay, I took some pictures tonight and will post them. I resized them and put them on low quality so they shouldn't be too big to load even for dial up folks.
The hydraulic oil puddle is from a leak on a fitting on my loader the other day so please ignore that. I didn't feel like moving the tractor to a clean cement area just to take pictures.
It went on pretty easy. Probably about 15 minutes total time by myself. I double checked all my implements and it should work for all of them except maybe my larger disc that was setup as a cat 2 originally.
It seems pretty heavy duty and overall I think it is well worth the $69.99.
Now for the pictures. I won't win any photography awards but you can get the general idea.
This closeup picture of the toplink is pretty blurry but you can still get the general idea.
FWIW, Nathan
I posted this on the other thread and will post again on this thread.
Okay, I took some pictures tonight and will post them. I resized them and put them on low quality so they shouldn't be too big to load even for dial up folks.
The hydraulic oil puddle is from a leak on a fitting on my loader the other day so please ignore that. I didn't feel like moving the tractor to a clean cement area just to take pictures.
It went on pretty easy. Probably about 15 minutes total time by myself. I double checked all my implements and it should work for all of them except maybe my larger disc that was setup as a cat 2 originally.
It seems pretty heavy duty and overall I think it is well worth the $69.99.
Now for the pictures. I won't win any photography awards but you can get the general idea.
This closeup picture of the toplink is pretty blurry but you can still get the general idea.
FWIW, Nathan
PAB_OH
Platinum Member
oooohhhh, I like it. Gonna have to get me one I think /forums/images/graemlins/grin.gif
Thanks for pics!
Thanks for pics!
PAB_OH
Platinum Member
oooohhhh, I like it. Gonna have to get me one I think /forums/images/graemlins/grin.gif
Thanks for pics!
Thanks for pics!
