Harbor Freight quick hitch???

Bedlam · Jun 8, 2006

Thanks for the pics. I was wondering, what pins it comes with.
I assume the two bolts that hold the top hook come with it. And also assume that the top pin does not.
How about the two lower lift arm pins?
Thanks for the pics, Good adverisement for HF.
Al

Bedlam · Jun 8, 2006

Thanks for the pics. I was wondering, what pins it comes with.
I assume the two bolts that hold the top hook come with it. And also assume that the top pin does not.
How about the two lower lift arm pins?
Thanks for the pics, Good adverisement for HF.
Al

npaden · Jun 8, 2006

It came with all the pins. They probably are the cheapest feeling part of the whole setup, they feel like cheap aluminum. Also the way the bottom link pins were setup I had to hammer them in with a hammer and bend them a little to get them all the way in.

npaden · Jun 8, 2006

It came with all the pins. They probably are the cheapest feeling part of the whole setup, they feel like cheap aluminum. Also the way the bottom link pins were setup I had to hammer them in with a hammer and bend them a little to get them all the way in.

jand38 · Jun 8, 2006

I am glad that you finaly received your Q/H now I have a few questions what are the measurements on inside and outside of the bottom lift arm, I keep hearning about 26 in. the reason I ask the Q/H at TSC is 27 1/2 inside and 29 1/2 outside which would be fine for me but not 26 in. <font color="blue"> </font>

jand38 · Jun 8, 2006

I am glad that you finaly received your Q/H now I have a few questions what are the measurements on inside and outside of the bottom lift arm, I keep hearning about 26 in. the reason I ask the Q/H at TSC is 27 1/2 inside and 29 1/2 outside which would be fine for me but not 26 in. <font color="blue"> </font>