Harbor Freight Tools that don't suck

   / Harbor Freight Tools that don't suck #4,062  
I have a similar electronic caliper (but not from HF).

I've also learned to remove the batteries for storage otherwise it always ends up dead. :confused3:
 
   / Harbor Freight Tools that don't suck #4,063  
Yes, always turn it off after use. The 6" Starrett that the HF was compared to had auto shutoff after 1 minute of non-use as I recall.

Have a project coming up that I will use the DC a lot. Will leave a new battery installed, shut off judiciously and see what happens. Maybe first battery was just a dud. Original battery was not installed when I bought it.

I have two of the HF calipers. They are auto shutoff, and each came with one battery installed plus a spare, but so far in several years of occasional use on the older one, it is still on the original battery. I think you just got one bad battery, or maybe your auto-shutoff isn't working right.

- Jay
 
   / Harbor Freight Tools that don't suck #4,064  
Yes, always turn it off after use. The 6" Starrett that the HF was compared to had auto shutoff after 1 minute of non-use as I recall.

Have a project coming up that I will use the DC a lot. Will leave a new battery installed, shut off judiciously and see what happens. Maybe first battery was just a dud. Original battery was not installed when I bought it.

Mine has auto-off and came with a batt installed and a spare..
 
   / Harbor Freight Tools that don't suck #4,065  
What kind of grease do you use in the grinder
 
   / Harbor Freight Tools that don't suck #4,066  
What kind of grease do you use in the grinder
 
   / Harbor Freight Tools that don't suck #4,067  
What kind of grease do you use in the grinder

I just use the general purpose moly grease that comes in the 1 pound cans at auto parts places. If you add about a teaspoon of power punch it thins it down a bit and keeps it from slinging all the way off. It might weep a bit at the seams if there isn't an o-ring or gasket seal, but it's minimal and a fair tradeoff for the superior lubrication.
 
   / Harbor Freight Tools that don't suck
  • Thread Starter
#4,068  
I have two of the HF calipers. They are auto shutoff, and each came with one battery installed plus a spare, but so far in several years of occasional use on the older one, it is still on the original battery. I think you just got one bad battery, or maybe your auto-shutoff isn't working right.

- Jay
You can buy those button batteries dirt cheap off eBay. Look for a LR44 battery.
Example: 10 x AG13 LR44 LR1154 SR44 A76 357A 303 357 Alkaline Coin Cell Button Battery G6 | eBay
 
   / Harbor Freight Tools that don't suck #4,069  
On the electronic calipers, I have the push button kind that I think is the one that auto shuts itself off. I'm not sure because I shut mine off when not being used. As mentioned, I have probably had it nine months or so and it's the original battery. It did not come with a spare.

My first thought is you just got a bad Chinese battery.
 
   / Harbor Freight Tools that don't suck #4,070  
How much are the Calipers? I could use them.
 

Tractor & Equipment Auctions

FAE UML/SSL 150 VT QUICK ATTACH HYD MULCHING HEAD (A51406)
FAE UML/SSL 150 VT...
2005 Kubota M105S (A50123)
2005 Kubota M105S...
2018 KENWORTH T880 (A53843)
2018 KENWORTH T880...
2017 Chevrolet Silverado 1500 Crew Cab Pickup Truck (A52377)
2017 Chevrolet...
2025 K5436 UNUSED (5) Wire Mesh Panels (A53117)
2025 K5436 UNUSED...
2016 INTERNATIONAL LF687 (A53843)
2016 INTERNATIONAL...
 
Top