hazards/4 ways not working????

   / hazards/4 ways not working???? #1  
Joined
Sep 29, 2008
Messages
12
Location
Middleton,MI
Tractor
Bobcat toolcat
going to check the fuses in the AM but they just quit working were working fine and just quit while they were on and working any ideas besides the fuses, any help would be great.
 
   / hazards/4 ways not working???? #2  
I'd check the fuse first, then the dash switch.

DEWFPO
 
   / hazards/4 ways not working????
  • Thread Starter
#3  
I checked the fuses and all were fine, but I noticed the front right turn signal bulb is out do you think that would cause it not to work, the blinkers don't work either
 
   / hazards/4 ways not working???? #4  
My flashers stopped working last year. Was a simple fix. The flasher control unit is a small, silver metal can that's attached to the wiring harness under the dash. It's not too hard to find...it's near the center of the dash. IIRC, it's a standard, two-prong device that you can buy almost anywhere (e.g. NAPA, Schucks, Checker, Autozone,...).
 

Tractor & Equipment Auctions

2023 MADJAX GENESIS 300 ELECTRIC CART (A57192)
2023 MADJAX...
Neckover GL24-2-7K Gooseneck Trailer  24ft Deck, Dual 7K Axles, 14K GVWR (A57024)
Neckover GL24-2-7K...
CASE TV370B SKID STEER (A52707)
CASE TV370B SKID...
Ford F-550 Auto Crane 4004EH 2 Ton Crane Service Truck (A55852)
Ford F-550 Auto...
2015 Liebherr L542 Articulated Wheel Loader (A55851)
2015 Liebherr L542...
2014 Ford F-250 4x4 Ext. Cab 8ft. Flatbed Truck (A55852)
2014 Ford F-250...
 
Top