Height with ROPS??

[Robertesq1]

Can anyone tell me where I can find the height of the tractors so that I can figure out whether they can fit in my garage?? I know that height changes according to specific tires but I don't have starting point to do the calculation....

 

[JD755]

The owner manuals usually have that information. You can view them on-line.

Operator's Manuals for John Deere Equipment

 

[ray66v]

Any dealer has brochures with numbers, any web site also has them.

Few of them fit in a 7 ft door, but many do fold to allow access.

The problem is remembering to put it down.

 

[kennyd]

Can anyone tell me where I can find the height of the tractors so that I can figure out whether they can fit in my garage?? I know that height changes according to specific tires but I don't have starting point to do the calculation....

What machine are you interested in? How tall is your door?

 

[Robertesq1]

Thnxs found it, my dealer couldn't

 

[CinderSchnauzer]

Any dealer has brochures with numbers, any web site also has them.

Few of them fit in a 7 ft door, but many do fold to allow access.

The problem is remembering to put it down.

Doesn't matter how tall the door is. I have a theory - There are only two types of tractor owners

1. Those who have already hit the door.
2. Those who will hit the door in the future.

Case in point, I have 14' roll up doors. but usually don't open all the way. I managed to hit one with the Honda ROPS which is barely over 6' and just a few days ago, I opened the door about 9' went off and did some work and in the meantime the door apparently crept down a bit because the chain came out of the safety clip.

Since I had driven out safely it never occurred to check the door height driving back in. Clipped the bottom by about 1/4" and broke off the weather strip.