hello All

[eviljinks]

hi, I have just joined up to this fine forum. I have just recently imported a DongFeng tractor from China. I purchased it with a front end loader, back hoe, slasher, flail mower, auger, log splitter, cultivator and carry all. I thought I might share my experiences with those of you that are interested in the fun and dramas I have had so far.
Just to get started, I ordered the tractor to be fully assembled, and is arrived in a knockdown kit as did all the implements. I will attach some pictures when I work out how. I also requested a full set of manuals in English of course, to be supplied, the documents I got were a parts list for the tractor, and a set of instructions for the log splitter and that is all..

 

[Muhammad]

Welcome to TBN.

 

[Baby Grand]

hi, I have just joined up to this fine forum. I have just recently imported a DongFeng tractor from China. I purchased it with a front end loader, back hoe, slasher, flail mower, auger, log splitter, cultivator and carry all. I thought I might share my experiences with those of you that are interested in the fun and dramas I have had so far.
Just to get started, I ordered the tractor to be fully assembled, and is arrived in a knockdown kit as did all the implements. I will attach some pictures when I work out how. I also requested a full set of manuals in English of course, to be supplied, the documents I got were a parts list for the tractor, and a set of instructions for the log splitter and that is all..

Welcome to TBN!
Sounds like you are getting a work out with your new machinery & photos will get you more responses from the folks who can help.
To attach photos:

1) Make sure the photos are only as big as necesary - some folks have slow service and will appreciate the extra effort you take to resize. I think < 1000k is the system requirement.

2) Start your message.

4) When you get to where you want a photo, scroll down & push the Manage Attachments button.

3) Use Browse to find your photo(s).

4) Select the photo(s) and hit upload & wait until you see the message that the photos have loaded.

5) Select the close window button.

6) Select the paper clip up top and attach your photo(s).

I welcome others to correct my steps - I'm working from memory here and it's just not as good as I remember it.

-Jim