bradx
New member
Just purchased a mf1020 looking for ward to the winter project
Bradx
Bradx
Hello from Manitoba, Canada
- Thread starter bradx
- Start date
- Views: 874
mguitas
Super Member
- Joined
- Aug 22, 2011
- Messages
- 8,080
- Location
- Schuylkill County Pennsylvania
- Tractor
- Massey Ferguson 1423 Hydrostat
:welcome:
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 19,515
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
Are those hard to find parts for?
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,935
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
G'day & welcome to TBN from Downunder.
kco
Veteran Member
Welcome to TBN. You live in a beautiful area. I worked there a few times in the mid 60's when I was a lineman with Manitoba Hydro.
creekbend
Super Star Member
Welcome aboard. Best wishes.
ScottyChip
Silver Member
Welcome to TBN. From the far east of Canada.
farmgirl19
Super Member
:welcome: from Texas!
haroldy
Silver Member
- Joined
- Mar 14, 2011
- Messages
- 197
- Location
- near peterborough,ontario
- Tractor
- kioti ck30,,front mount snowblower
Hi welcome to tbn
i have had a mf1020 for 22 years
I bought it with 600 hours,now have 1800 or so
I used it for grading ,snow blowing and any other use you can imagine
handy as a shirt pocket
I have had a few small problems,some due to my stupidity,others just normal wear,
most of the hours have been snowblowing,i have maintained 3 km of private road with a front mounted blower
i made a homemade cab out of 1/2 inch lexan from a hockey arena ,no heat dont need it
to mount the snowblower i mount it in place of the bucket ,I made a reverse mechanism and drive a shaft under the tractor to power the 6 foot blower
It isnt fast but does the job.better than backing up
I am sure you will love your little tractor
i have had a mf1020 for 22 years
I bought it with 600 hours,now have 1800 or so
I used it for grading ,snow blowing and any other use you can imagine
handy as a shirt pocket
I have had a few small problems,some due to my stupidity,others just normal wear,
most of the hours have been snowblowing,i have maintained 3 km of private road with a front mounted blower
i made a homemade cab out of 1/2 inch lexan from a hockey arena ,no heat dont need it
to mount the snowblower i mount it in place of the bucket ,I made a reverse mechanism and drive a shaft under the tractor to power the 6 foot blower
It isnt fast but does the job.better than backing up
I am sure you will love your little tractor
thanks haroldy
have not had time to get at mine yet other than clean it up, it is a winter project!!
the fishing is still good here and summer projects are still on going.
I am looking forward to getting it inside and tearing it down, not familiar with the 3 cly diesel
but should be fun
have not had time to get at mine yet other than clean it up, it is a winter project!!
the fishing is still good here and summer projects are still on going.
I am looking forward to getting it inside and tearing it down, not familiar with the 3 cly diesel
but should be fun
