Good evening friends! I recently purchased an older 7ft flail mower from an older lady who cold not remember what brand it was. I can not find any markings. Now the cutter shaft bearings need replaced and I can not find the corrent ones please help if you can
WranglerX
Super Member
I would think if you pulled off the plate and looked at the outer race of bearing there "may" be some numbers on it that will relate to bearing specification and finding replacement...
Sportsman762
Platinum Member
- Joined
- Mar 28, 2008
- Messages
- 917
The mower is an Alamo or Mott. Alamo bought Mott so they are the same. The flail is most likely a model 72 or 74. FlailMaster and Montage most likely have the parts you need.
Flailmaster
Montage
Page 6 of the Flailmaster catalog has some data on how to ID the bearing.
Flailmaster
Flail Master
Flail-Master - Serving the Mowing Industry for more than 50 years About Flail-Master Flail-Master ® has been serving the mowing industry for more than 50 years, with most of what we sell being produced right here in our factory in the heart of Tennessee, USA. Flail-Master offers replacement...
www.flailmaster.com
Page 6 of the Flailmaster catalog has some data on how to ID the bearing.
Thank you so much!!The mower is an Alamo or Mott. Alamo bought Mott so they are the same. The flail is most likely a model 72 or 74. FlailMaster and Montage most likely have the parts you need.
Flailmaster
MontageFlail Master
Flail-Master - Serving the Mowing Industry for more than 50 years About Flail-Master Flail-Master ® has been serving the mowing industry for more than 50 years, with most of what we sell being produced right here in our factory in the heart of Tennessee, USA. Flail-Master offers replacement...www.flailmaster.com
Page 6 of the Flailmaster catalog has some data on how to ID the bearing.