HELP I'm installing a 3rd remote on the L805 FEL
- Thread starter USCG1
- Start date
- Views: 1557
Herkypilot
Platinum Member
- Joined
- Oct 3, 2011
- Messages
- 566
- Location
- Meadows of Dan, VA
- Tractor
- Kubota M7060 HDC12, KX040 & L3540 HST
As a sidebar - I have an L3540. I've always been puzzled what Kubota expected that brush guard on the front was going to protect? Mine is a bit different design, but still open enough so that just about anything can slip in there and cause damage.
Btw, just so this isn't a total hijack of your thread, I installed a WR Long kit on mine. I had not noticed before that Kubota shifted all the plumbing to outside the loader arm on the 3560. I've seen a previous pic of a guard installed covering the quick disconnects. Does yours have one too and you just left it off for the picture?
HP
Btw, just so this isn't a total hijack of your thread, I installed a WR Long kit on mine. I had not noticed before that Kubota shifted all the plumbing to outside the loader arm on the 3560. I've seen a previous pic of a guard installed covering the quick disconnects. Does yours have one too and you just left it off for the picture?
HP
