Help: John Deere 4000 series handle question
- Thread starter MinnesotaEric
- Start date
- Views: 13217
-
- Tags
- john deere 4000
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,039
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Are the plastic hand grips available separately?
Mine is cracked and the previous owner taped them together.
Also... the stick is sloppy... best guess is it was forced with the lock on.
Everything works so I have not delved into making it a priority repair.
Mine is cracked and the previous owner taped them together.
Also... the stick is sloppy... best guess is it was forced with the lock on.
Everything works so I have not delved into making it a priority repair.
kennyd
Advertiser
These are the part numbers (as posted elsewhere on the forum), you can look them up in JDP as well:
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,039
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Thanks Kenny D... Just what I needed.
powerscol
Veteran Member
OK folks - are all relays for this handle created equal. My JD dealer indicates that the wiring harness plugs into a very expensive relay and fuse block that uses AT 308380 micro relays. This part number crosses over to a 280-SAE J1744 relay. Is there something special about this relay - its expensive. Is it matched to the switch . I cant seem to find any particulars on the grip switch or the switching load in the relay. Thanks for any education you can giv me. I have shorted out to many device in my lifetime so far :confused3::laughing:
kennyd
Advertiser
powerscol
Veteran Member
Sorry Kenny I did not know you responded. I'm not getting notifications. When I click on the alert icon is indicates no new message even though they are there. I found what you said - thanks for helping.
When I found the JD relay number that went with the grip, I was curious if it was something special. Ill just use what you recommended.
Thanks again
When I found the JD relay number that went with the grip, I was curious if it was something special. Ill just use what you recommended.
Thanks again