Help with glow plugs

/ Help with glow plugs #1  

decableguy2000

Bronze Member
Joined
Aug 1, 2004
Messages
50
Help me figure out if my glow plugs are going bad. I have a Farmtrac 300 DTC with a Mitsubishi S4L 1.5L engine. Hard starting when temps drop to around freezing. The book says the standard is .55 ohms. mine are reading .7-1.7 ohms. Should I replace them

Also need a cross reference for the glow plug to Mitsubishi #32a6603100, markings on the plug JA31M 10.5v h6b5
 
/ Help with glow plugs #2  
Better to find a way to measure current flow through each injector when energized . Glow plugs or not , plug the block heater in to pre-warm the engine .
 

Marketplace Items

02GER CHICKET HOUSER 240F (A62131)
02GER CHICKET...
UNUSED KJ K1522 PORTABLE RESTROOM (A62131)
UNUSED KJ K1522...
Sakai SW354 (A60462)
Sakai SW354 (A60462)
2019 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER (A59909)
2019 FREIGHTLINER...
120 GALLON WATER TANK (A62131)
120 GALLON WATER...
Lift cylinder for model 48 john deere loader
Lift cylinder for...
 
Top