Heres one for you...

[bgott]

http://home.att.net/~jmsmith45/optmisc.htm

There is a few "updated" N series tractors here.

 

[Hoeman00]

Dad built an F-20 Farmall w/a 327 Chevy and powerglide hooked to original trans.
It would disk ground at 30 Mph.

 

[s1120]

<font color=red>Dad built an F-20 Farmall w/a 327 Chevy and powerglide hooked to original trans.
It would disk ground at 30 Mph. </font color=red>

When I was a kid, my dad picked up an old Cat dozer for the back hoe on it. Some one had swapped in a 307ci Chevy motor. Ran good, but always hot, and just did not have the tourke it should have.

 

[cj7]

This is starting to be a long thread.

 

[s1120]

<font color=red>http://home.att.net/~jmsmith45/optmisc.htm

There is a few "updated" N series tractors here</font color=red>

Ohh!! I like that 351 powerd one. Hay, I have a few of those motors sitting around.hmm/w3tcompact/icons/hmm.gif

 

[Hoeman00]

3 PAGES WOULD BE A LLOOONNNNGGGGG THREAD.

 

[cj7]

hmmmmm


good point...

 

[tiltbed]

now ya have me thinkin..rotflmao...no really was trying to figgure a way to replace the mag on the Case,one of the lobes are worn...$350.00 for a rebuilt.think i can adapt a electronic ign out of maybe a GM 4 cyl...hummmmm cut the head about .30 ....work the cam over with the grinder...flip the intake and adapt a webber. guess tractors are like Jeeps and Harleys...real ones are built not bought..... Sid

 

[s1120]

THATS what I'm talking about. Anyone can sign there name and buy one. It takes a true wacko to build there own./w3tcompact/icons/smile.gif/w3tcompact/icons/grin.gif

 

[Booker57]

Nitro is a type of liquid fuel

Nitrous (short for nitrous oxide) is an oxygen bearing gas.

If you use electronic fuel injection, where do you fit the pump? Is there enough room for one in a tractor fuel tank?

 

[tiltbed]

ie:laughing gas...commonley used in denistry....throttle body fi just uses a transfer pump.multi port must use a transfer and also a pressure pump.nitrious uses bottle pressure that is porportioned through a regulator....Sid

 

[s1120]

<font color=red>If you use electronic fuel injection, where do you fit the pump? Is there enough room for one in a tractor fuel tank? </font color=red>

They make retro fit highPSI fuel pumps now, that mount inline. No need to fab an intank setup. Lots of good stuff out there these days./w3tcompact/icons/smile.gif

 

[tiltbed]

this is true Mike...same as oxygen is medical and industral grade also....gee do you really thik one of these guys would try and breathe n/ox ????I sure hope not...lol..Sid