fieldman12
Gold Member
- Joined
- Oct 13, 2001
- Messages
- 415
- Location
- OHIO
- Tractor
- 2001 New Holland TN70,2003 John Deere 250 Series II skidsteer,1987 John Deere 2155,2013 John Deere 5055E MFWD,2007 Duramax 4x4 truck, 1973 MF 165,Artic Cat 550 Cougar sled
Hitch assist backup feature
- Thread starter fieldman12
- Start date
- Views: 4747
Daver1963
Platinum Member
- Joined
- May 14, 2013
- Messages
- 675
- Location
- Idlewild, Tn
- Tractor
- Kubota L2800DT w/LA524 FEL, Cub Cadet XT1
I hope its perfected and we don't read a news story about how one of those switches malfunctioned, set the tractor in high gear, and ran over someone!
Other than that it's kinda neat!
Other than that it's kinda neat!
Dutch445
Elite Member
if i recall correctly,
brake is engaged, low range only, and it moves at a snails pace. but could come in handy for sure.
i didn't like seeing all the wires for it exposed under the fender, and explained that to the Deere folks
in florida,
hopefully they protect them.
brake is engaged, low range only, and it moves at a snails pace. but could come in handy for sure.
i didn't like seeing all the wires for it exposed under the fender, and explained that to the Deere folks
in florida,
hopefully they protect them.
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,841
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
Sure beats reaching around and pressing the HST peddle or adjusting the normal 3 pt controls.
arlen4720
Veteran Member
- Joined
- Jul 6, 2012
- Messages
- 1,277
- Location
- Southeast Minnesota
- Tractor
- JD 4720, JD X748SE, JD 997, Farmall "B", Gator 865R, JD 320D Skid Steer
You mean after bypassing the seat switch?:shocked:
JoeL4330
Platinum Member
clever ...could be useful putting on chains, as well.
Bypass the seat switch? I find I can make small adjustments with the go-pedal (HST) without stalling,[without incurring the wrath of the "operator presence" relay] if I'm quick and gentle ...However, I find it even easier to move the tractor back and forth a smidge using the FEL bucket.
Bypass the seat switch? I find I can make small adjustments with the go-pedal (HST) without stalling,[without incurring the wrath of the "operator presence" relay] if I'm quick and gentle ...However, I find it even easier to move the tractor back and forth a smidge using the FEL bucket.
arlen4720
Veteran Member
- Joined
- Jul 6, 2012
- Messages
- 1,277
- Location
- Southeast Minnesota
- Tractor
- JD 4720, JD X748SE, JD 997, Farmall "B", Gator 865R, JD 320D Skid Steer
For better or worse, the JD eHydro is too smart for that.
Green Power
Veteran Member
- Joined
- Dec 1, 2013
- Messages
- 1,077
- Location
- Nebraska
- Tractor
- LS R4047H, Kubota L33400 JD: 5075E 6150M 9230 and 8520
Nice feature... but has to be expensive.
wsc9tt
Silver Member
Nice enough feature, but they would get more credibility if the Kubota guy acted like he had a bit more experience with the machine.
And he had extendable 3pt links, but didn't use them.
Like other people suggest, I can use my HST peddle from the ground to move the machine forward and backwards a couple inches without stalling the machine. And the 3pt raise and tilt controls are not hard to reach from the ground.
I keep wanting this feature: our 3pt arms lower clear to the ground so when your implement has fallen off your blocks and sunk into the mud you can still hitch it up without killing yourself. ;-)
And he had extendable 3pt links, but didn't use them.
Like other people suggest, I can use my HST peddle from the ground to move the machine forward and backwards a couple inches without stalling the machine. And the 3pt raise and tilt controls are not hard to reach from the ground.
I keep wanting this feature: our 3pt arms lower clear to the ground so when your implement has fallen off your blocks and sunk into the mud you can still hitch it up without killing yourself. ;-)
