moship
Veteran Member
I was tired of getting covered with snow slush and water spray when out snow blowing, so I decided to make a set of front fenders. After contacting a few folks who tried installing them to pivot with the wheels, I decided to take the easier route and mount them stationary using the FEL attachment bolts.
The fenders are wide enough to provide splash protection when turning. Can be easily removed and will clear all possible wheel articulations & FEL movement.
Future plans include adding a small extension/flap to the bottom for further splash protection. Plan on cutting up a generic plastic mud flap or make something using aluminum sheet.
In any case I thought I would share with the group.
The fenders are wide enough to provide splash protection when turning. Can be easily removed and will clear all possible wheel articulations & FEL movement.
Future plans include adding a small extension/flap to the bottom for further splash protection. Plan on cutting up a generic plastic mud flap or make something using aluminum sheet.
In any case I thought I would share with the group.