Home made Heaters?

   / Home made Heaters? #1  

Dataway

Gold Member
Joined
Aug 10, 2005
Messages
379
Location
Greenfield TN
Tractor
Ford 1715, BX2200
Anybody made their own cab heaters?

If I should just use the search engine...tell me and delete this thread :)

JohnnyB
 
   / Home made Heaters? #2  
I tried to make one for a skid steer cab. I used a small heater core from the parts store and built a heater box around it. The core gets good and hot but the fan I used does not put out enough air. I will need to rework it so that I can install a better fan then it should work just fine.
Rob
 
   / Home made Heaters? #3  
One can but heater cores and fan combinations but I would be scrounging through the car wreckers lots to see if they had had something that would work.:D :D
 
   / Home made Heaters? #4  
I am planning on building one as well. My plan is to use a computer fan (or two) since they:

- Are cheap
- Move a good amount of air
- Don't draw much juice

Check out this link or do a search on computer cooling systems as they have radiator cores that are all set up to accept these fans (they are made to cool high power CPUs)

Radiators | Shrouds | Page 1 | Sort By: Highest Rating - FrozenCPU.com  
 
   / Home made Heaters?
  • Thread Starter
#5  
Thanks for the ideas.... I've got a small metal fabrication shop...should be able to come up with something similar.
JohnnyB
 

Tractor & Equipment Auctions

2024 JOHN DEERE 6155M LOT NUMBER 9 (A53084)
2024 JOHN DEERE...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
12" PIN ON BUCKET (A52707)
12" PIN ON BUCKET...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A53421)
2025 Kivel 48in...
JLG 1255 Telehandler (A55302)
JLG 1255...
Miller Trailblazer 250G 4,000 Watt Welder/Generator Set (A55851)
Miller Trailblazer...
 
Top