Homemade Two wheel tractor

[Vyacheslav Nevolya]

 

[radios1]

View attachment 594822 View attachment 594823 View attachment 594824 View attachment 594825

welding a bearing takes the temper out, and it won't last long..

 

[Vyacheslav Nevolya]

welding a bearing takes the temper out, and it won't last long..

You did not understand correctly. First I do welding, and then I cut the hole for the bearing.

 

[radios1]

You did not understand correctly. First I do welding, and then I cut the hole for the bearing.

View attachment 594832 View attachment 594833 View attachment 594834 View attachment 594835

my mistake!. it looked like you welded to the bearing, but now I see the welded part was just a ring the bearing fit into!. https://www.tractorbynet.com/forums...omemade-two-wheel-tractor-20190307_111907-jpg so all good!..

 

[Kyle_in_Tex]

Very interesting. You have good design ability.

 

[Vyacheslav Nevolya]

Reverse gear

 

[Tennsawdust]

That is going to be a very strong 2 wheel tractor!

 

[Vyacheslav Nevolya]

 

[Vyacheslav Nevolya]

Now in the photo there are gears for switching the reverse and the front run. It is necessary to make an additional reduction of revolutions in 4 times and to make a power take-off shaft

 

[radios1]

Now in the photo there are gears for switching the reverse and the front run. It is necessary to make an additional reduction of revolutions in 4 times and to make a power take-off shaft

yeah, you wouldn't want the reverse going so fast, it runs you over!..