Hose size question

   / Hose size question #1  

etpm

Veteran Member
Joined
Jun 30, 2021
Messages
2,036
Location
Whidbey Island, WA
Tractor
Yanmar YM2310, Honda H5013, Case 580 CK, Ford 9N
All the hoses on my Yanmar YM2310 for the FEL are 1/4" according to the markings on the hose. When I add the power steering cylinder I would rather use 3/8" hose. The only reason being that there will be less resistance to flow. The 3/8" hose is virtually the same price as the 1/4" stuff as are the re-usable fittings. Are there any reasons to NOT use 3/8" hose when everything else is 1/4"?
Thanks,
Eric
 
   / Hose size question #2  
Shouldn't be a problem at all! flow will be increased, but also restricted by any existing fittings.
 
   / Hose size question
  • Thread Starter
#3  
Shouldn't be a problem at all! flow will be increased, but also restricted by any existing fittings.
Yeah, that's what I think too. The fittings will be the main restriction.
Cheers,
Eric
 

Tractor & Equipment Auctions

2005 IHI 35N-2 Mini Excavator (A46683)
2005 IHI 35N-2...
Wolverine BC-13-72W, 72" Skid Steer Brush Cutter (A47371)
Wolverine...
2012 Ford F-250 Knapheide Service Truck (A46683)
2012 Ford F-250...
CAT 416F Backhoe (A43476)
CAT 416F Backhoe...
Feed Bunk (A49339)
Feed Bunk (A49339)
2011 Ford F-350 Knapheide Enclosed Service Truck (A46683)
2011 Ford F-350...
 
Top