MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,313
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
I'm not as photogenic as those guys /forums/images/graemlins/tongue.gif
How about if WE create a training tape?
- Thread starter smartguyz
- Start date
- Views: 2288
OP
smartguyz
Gold Member
- Joined
- Mar 16, 2003
- Messages
- 488
- Location
- Beaverton, Oregon
- Tractor
- JD318, Power-Trac PT425 with scuffed-up green paint.
PJ,
I agree with the points you made in your posts on this subject. Perhaps we should simply do this on our own, especially if it can be accomplished with just photos with captions, etc. Several of us have cameras and PTs, but only a few (such as you) have gone through training with Terry. How should we start, guys?
I'm thinking that perhaps we could start by taking up where Moss has left off. BTW - your treadle assembly looks like a great improvement over mine - less stuff to get clogged with debris and dirt.
-Rob /forums/images/graemlins/grin.gif
I agree with the points you made in your posts on this subject. Perhaps we should simply do this on our own, especially if it can be accomplished with just photos with captions, etc. Several of us have cameras and PTs, but only a few (such as you) have gone through training with Terry. How should we start, guys?
I'm thinking that perhaps we could start by taking up where Moss has left off. BTW - your treadle assembly looks like a great improvement over mine - less stuff to get clogged with debris and dirt.
-Rob /forums/images/graemlins/grin.gif
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
I will get some photos of the two areas mentioned (bleed and brake release) with captions and post. I do not have the computer skills that Mossroad and others have.
PJ
PJ
