Carlton G
New member
i have a John Deere 990 with a front end loader. How can I run a Woods stump grinder without removing the loader.
how do I control more than one piece of equiptment ?
- Thread starter Carlton G
- Start date
- Views: 856
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Is it PTO driven or hyd powered?
You have 35 HP at the PTO.
You have about 9 HP using the hyd.
If hyd, you could use a PB from the loader valve to feed the stump grinder.
Hydraulics:
Type: open center
Capacity: 5.5 gal [20.8 L]
Pressure: 2262 psi [156.0 bar]
Pump flow: 8.5 gpm [32.2 lpm]
Total flow: 13 gpm [49.2 lpm]
Steering flow: 4.5 gpm [17.0 lpm]
You don't have a lot of fluid for a stump grinder.
Have you looked at the stump grinder hyd requirement.
You have 35 HP at the PTO.
You have about 9 HP using the hyd.
If hyd, you could use a PB from the loader valve to feed the stump grinder.
Hydraulics:
Type: open center
Capacity: 5.5 gal [20.8 L]
Pressure: 2262 psi [156.0 bar]
Pump flow: 8.5 gpm [32.2 lpm]
Total flow: 13 gpm [49.2 lpm]
Steering flow: 4.5 gpm [17.0 lpm]
You don't have a lot of fluid for a stump grinder.
Have you looked at the stump grinder hyd requirement.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,111
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Post a link to the model of Woods stump grinder you plan on using. It would be helpful.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,111
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Oh yeak I almost forgot.... Welcome to TBN! :welcome:
Katahdin
Platinum Member
I have a Woods TSG50, I'm pretty sure he's asking about adding rear remotes to run the two double acting cylinders for up/down left/right movement. The grinding wheel is PTO powered.
The Woods TSG50 can operate off two sets of rear remotes, or one pair with either the manual or electric selector valve kit from Woods for the stump grinder.
The Woods TSG50 can operate off two sets of rear remotes, or one pair with either the manual or electric selector valve kit from Woods for the stump grinder.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,111
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
If it has a loader you could always put in quick connects and use the loader controls to operate the stump grinder, however, you'd be facing the wrong way for controls and have a spaghetti knot of hoses. Maybe not a good idea.... :laughing:
I'm used to having all my implements out front.
I'm used to having all my implements out front.
