How long has the RTV been made?
- Thread starter Robert_in_NY
- Start date
- Views: 6203
Skipholiday
Platinum Member
That X595 has the same engine as the XUV. Notice it also has wheel weights and some sort of i beam attached underneath. Personally I'm surprised the tractor didn't win~!Robert_in_NY said:
I believe I could have pushed that truck out with my bare hands if I had those honeys in the bota cheering me on..JayC said:
OP
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,552
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
I knew the lawn mower wasn't a Home Depot special but I would think both units would be at minimum equal weight if the XUV didn't edge it. Plus, the X595 has turf tires on it from the looks and the XUV has what appear to be standard ATV tires. If you figure equal weight and equal power then traction should easily have been in the XUV's favor so unless the X595 is made from lead why wouldn't the XUV pull the tractor backwards
OP
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,552
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
darkday said:
What about the guy who had the bright idea to stand on the rear bumper of the ranger as the RTV tried to yank it out
Second try he smartened up and hopped into the box and is lucky he didn't bust his head open when the RTV yanked on it.
TOMMYHPX4X4
Veteran Member
- Joined
- May 25, 2005
- Messages
- 2,005
- Tractor
- gator hpx 4x4
that xuv should have pulled it . if they had the same weight and enginesthe only diferencs was the xuv had 4 tires pulling instead of the tractor that just had two somthing wrong there???
Robert_in_NY said:I knew the lawn mower wasn't a Home Depot special but I would think both units would be at minimum equal weight if the XUV didn't edge it. Plus, the X595 has turf tires on it from the looks and the XUV has what appear to be standard ATV tires. If you figure equal weight and equal power then traction should easily have been in the XUV's favor so unless the X595 is made from lead why wouldn't the XUV pull the tractor backwards
Skipholiday
Platinum Member
The X595 has lower gearing. They look evenly matched.Robert_in_NY said:unless the X595 is made from lead why wouldn't the XUV pull the tractor backwards
OP
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,552
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
What good is gearing without traction?Skipholiday said:The X595 has lower gearing. They look evenly matched.
Skipholiday
Platinum Member
None.Robert_in_NY said:
Both were spinning. I would like to see it on asphalt. Just not with mine.
I'm sure the diesel xuv would out pull the gas model..