How much trouble would I get in for doing this?
- Thread starter FTG-05
- Start date
- Views: 3186
TripleR
Super Star Member
- Joined
- Mar 5, 2009
- Messages
- 18,538
- Location
- Missouri
- Tractor
- Kubota M8540HDC, L5740HSTC, BX2200, BX2660, John Deere 425&1025R, Case, Massey Ferguson, Ford
I believe a flag is mandated as it tends to attract attention while waving about whereas a stationary object will not.
In Missouri a SMV is to be used only for its intended purposes and not for long lengths or to mark driveways.
In Missouri a SMV is to be used only for its intended purposes and not for long lengths or to mark driveways.
OP
FTG-05
Elite Member
- Joined
- Jan 7, 2011
- Messages
- 2,593
- Location
- TN
- Tractor
- Kubota L4330 GST w/FEL, Kubota RTV-XG850, Kubota ZD326S
This is what I'm looking for, I think (in addition to a flag or two):
From here: http://www.awdirect.com/cone-sign-blank-orange-reflective-4361b2o2/safety-cones-traffic-cones/
From here: http://www.awdirect.com/cone-sign-blank-orange-reflective-4361b2o2/safety-cones-traffic-cones/
You are not even allowed to have a slow moving sign visible on equipment you are floating. So if you have your tractor on a trailer, the sign must be covered or removed. Although I have only been stopped once for this in a decade.
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,616
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
How about fashoning a similar sign, but use Scotchlite tape on it. There are many different designs on said tape anymore... For night time, maybe a LED lightbar. And as for a reminder that it is back there, maybe a set of the lighted guide bars you see on front bumpers of semi's. They do make shorter ones for pickup's.
deereman75
Veteran Member
- Joined
- Apr 29, 2011
- Messages
- 1,912
- Location
- canada
- Tractor
- Deere 2120, Warner & Swasey 6000# offroad forklift, Case W9B loader, various non-running decorations
What about taking a piece of angle iron and mounting it on the back of the rig and putting a square piece of sheet metal covered in orange duct tape in the middle, and put a flag on each end of the angle iron.
