How to add Duals rear tires to Yanmar

[DavesTractor]

I think I have what you need. These came over from Japan years ago on Yanmar's that either had duals or just had really wide spacing. I don't remember. But in any case, we narrowed them up. I have 3 pairs, all a little different. 2 are for rears, one set is for fronts. I suppose you could use these to install duals, but if you want them hub-centric, they would have to be used as spacers only. But then again, you'll probably keep the Yanmar under 60 mph anyway....I'm having problems uploading images, so I am not sure if the pictures will display. If not and you want to see them, PM me with your email. Thanks.

 

[DavesTractor]

Let me try this. For years I have had no problems uploading pictures, but it hasn't worked for me in months. Not sure why. I can't see most attachments either. Just get the box with an X. Not sure if it is my system or what.

photo 1_zpsl8ldhlkt.jpg Photo by davestractor_lee | Photobucket
photo 2_zpsvqodgekg.jpg Photo by davestractor_lee | Photobucket

 

[oldpilgrim]

Spacers are what you need. You'll be really surprised when you see how much of a difference 2 or 3 inches will do on a side.

These guys made some spacers for my brother and his Kioti. They do some really great work and will do what you need. Ask for Lenny. You won't find a better company to deal with.

Motorsport Tech
10 Greg St. Suite 112
Reno, NV 89431

Office 775 351 1000
Cell 909 844 0942

Wheel Adapters, Wheel Spacers, Hub Rings, and much more! | Motorsport Tech

 

[Sfrankland]

Here is a set of 3" spacers I made up for the dealer here. The axle on smaller tractors are not built for the loads of dual tires. I added Calcium to my fathers 2516 Mahindra and it also made a huge difference to the stability.