How to keep your beverage safe?

[PineRidge]

Code? Oh yes I remember code Inspector......

My little job might not pass yer' code but it holds my coffee cup just swell. /forums/images/graemlins/grin.gif

 

[JasonL]

I'm not a plumber or an inspector but it looks good to me. I did something similar for chain boxes on my FEL. Somewhere on TBN I saw this and had to make my own (JD green of course /forums/images/graemlins/smile.gif!) Will attempt to attach a picture (never tried before) Jason

 

[JasonL]

That was so much fun I think I'll try another! I just bolted these on through an existing hole and then used silicone at the top. So far they are holding up well. I know these are knockoffs from other TBN'ers but just want to show you guys how helpful you are. Jason

 

[creeper]

Nice job, how are you guys preping the pvc for paint ? Just clean and sand ? I haven't had much luck in the past painting it.

 

[PineRidge]

I just used a small piece of rather fine sandpaper to knock the gloss off the PVC before the paint was applied. I didn't get fancy otherwise.

 

[TOMLESCOEQUIP]

<font color="blue">
My little job might not pass yer' code but it holds my coffee cup just swell. </font> <font color="red"> Code ??..(yer' code)...."YES" ICE CODE !!!! </font>

 

[KenVT]

</font><font color="blue" class="small">( I have a soft cup holder on my B2910 for about 4 years with no problems. I keep a 25 ounce water bottle in the holder most of the time. )</font>


That's not Water in that holder!!... Oh wait , it is water.... It's just the King of Water, Budwater. /forums/images/graemlins/grin.gif

Ken

 

[ronjhall]

When I drink Bud. It is always imported Canadian BUD. Probably just a little less water. /forums/images/graemlins/grin.gif

 

[RalphVa]

The vertical part of my FEL has a couple holes through which I can attach a tension cord that holds up my thermos. It's an easy reach to unscrew the thermos top with its cup inside and then pour myself a cupful when thirsty from the spigot on the side of the thermos.

May make something a little more permanent in the future, as the thermos sticks at a tad past the FEL tower and could be snagged by a limb. Like those ideas of bolting something in place. Just needs something big to hold the big thermos.

Ralph

 

[froggy]

If you were a newlywed, you could ask your new bride to carry your beverage while walking along side the tractor! /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

Wouldn't suggest this if you've been married more than a year, it could be dangerous to your health. /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif