How to remove stuck backhoe bucket tooth?

   / How to remove stuck backhoe bucket tooth?
  • Thread Starter
#11  
DiskDoctr

Full sized industrial backhoe/loader. I DO have a nice stout (grade 100) chain that I could try that with… perhaps I could “anchor” it to my Miata? Lol I’d sure hate to hurt my backhoe though!

Ozarker
I have an air chisel and no, haven’t tried it. Hadn’t thought of it either

Markct
I DO have an angle grinder and I had not thought of that either

V8dave
I agree with you that the 2 pound hammer seems to be too puny, I’ve got access to a “real” sledge though I don’t know how heavy…

Thanks for the ideas. I think I have a tentative game plan of using the larger sledge I have access to along with the chisel I have. I think the handle would perhaps give me the place to tape it down and see what happens.

Beyond that, I have a Dewalt angle grinder, 4” I think? That already happens to have a diamond blade attached to it.

Oh… as an aside, I noticed the other day that ONE of these obnoxious teeth already has a split in it. The split goes from the edge of the skirt, all the way to the point. The full length of it. Perhaps a 1/16th of an inch wide or so. The crack appears to go all the way through the tooth.

As I make comment about the split tooth, I’m a bit intrigued as to why this tooth is so dang tight. There is absolutely ZERO wobble in both of the stuck teeth. Logic would tell me that if this one is split essentially 100% along the side, it SHOULD be on the loose side.
/forums/images/graemlins/confused.gif
 
   / How to remove stuck backhoe bucket tooth?
  • Thread Starter
#12  
Well, we've had success!! /forums/images/graemlins/grin.gif

Got my 4" cold chisel out w/2 lb hammer

The split tooth came off after several harrumph'ing hits the other tooth was a different matter. I hit & hit & hit & hit. Finally realizing it might be off camber and jamming onto itself, I flipped bucket over to hit other side as well.

(repeat hit & hit & hit & hit & hit several times)

and I FINALLY noticed it rocking a bit on it's setting /forums/images/graemlins/laugh.gif

I gotcha nowwwwwwwwwwww!!

Flipped over again couple more whammies & off it came. It didn't pop off like others, but inched itself off.

Now I got 4 brand new teeth, and they're <font color="blue"> BLUE!! </font>

I've got blue teeth on a yellow machine. Good thing I've got no fashion police around me (other than my wife of course)

Thanks for the idea, not sure I'd thought about the chisel nor grinder.
 
   / How to remove stuck backhoe bucket tooth? #13  
Richard glad to hear that it all worked out well for you. I find my small sledge and cold chisel to be the most valuable tools in my tractor toolbox. I refer to them as my persuaders.
 
   / How to remove stuck backhoe bucket tooth? #14  
Well, duh? Shame on me for not suggesting what you finally did to get it off. A few sideways blows on something stuck almost always softens it up for me and I forgot to say that.

Mike AKA pineridge: you made me laugh with your comment. I'm known in the family as always going to get a bigger persuader. It fits with my signature line.

Regards,
Dave
 
   / How to remove stuck backhoe bucket tooth? #15  
Richard,
Glad to see you got it off. I was going to make another suggestion (which you now don't need), but I picked up one of those 10 ton portapower hydraulic ram sets from Harbor Freight for $99. I have found it useful for many things.
Lar
 
   / How to remove stuck backhoe bucket tooth? #16  
Larry.
How do you pronounce- Honeoye?
 
   / How to remove stuck backhoe bucket tooth? #17  
George,
Just like it is spelled /forums/images/graemlins/grin.gif --- Honey - Oi
 

Tractor & Equipment Auctions

Light Tower (A52377)
Light Tower (A52377)
UNUSED 70PCS Grey Metal Roof Panels (A53117)
UNUSED 70PCS Grey...
John Deere 333E (A47477)
John Deere 333E...
2012 SOUTHERN 130BBL VACUUM TRAILER (A53843)
2012 SOUTHERN...
Duetz Power Unit (A50120)
Duetz Power Unit...
2011 IC Corporation PB105 School Bus (A52377)
2011 IC...
 
Top