Backhoe How to store 3PH backhoe??

   / How to store 3PH backhoe?? #11  
Thanks Kodiak, no I did not build the backhoe myself but I have converted it. Originally it was attached to the back of a small loader. I cut of the fixtures to that mashine and added 3PH bolts. I also made stabilizers out of square tubing (you can see part of them in the picture) and a new top link attached at the same place as the stabilizers so not to affect the hydraulic deep regulation. A return line for the hydraulic fluid was also built connected with a large return oil filter. The output is just about 4 GPM but I am in no hurry when digging! It realy takes time to master the technique of excavation!
 
   / How to store 3PH backhoe??
  • Thread Starter
#12  
Hi,

Just a side safety note, that came to mind since you mentioned you adapted the backhoe to your 3PH.

Do you have some kiind of locking bar that would prevent the hoe from lifting and jamming you between your ROPS and hoe, if something happened, like the top link pin breaking?

My factory hoe has a locking bar that extends under the two bottom 3PH lifting arms, as a safety backup in case something breaks.

THere is a safety note at Carver's Web site that describes a fatality that resulted from not using such a device. Reading that opened my eyes to a danger that I never considered.

Just a thought...

Bill in Pgh, PA
 
   / How to store 3PH backhoe?? #13  
Thanks Bill for your comments on the 3PH connection.
I have been thinking along the same lines after reading earlier postings on backhoe traktor safety.
I am planning to add an extra top link from the backhoe to my drawbar.
 
   / How to store 3PH backhoe?? #14  
I keep my 4690 BH on a dolly too, with the stabilizers up. I tie them up to prevent leak down.
 
   / How to store 3PH backhoe?? #15  
Here is a link with pictures ( I hope ) to how I store my backhoe.
<A target="_blank" HREF=http://www.tractorbynet.com/cgi-bin/compact/showthreaded.pl?Cat=&Board=implement&Number=87958&Search=true&Forum=All_Forums&Words=therrien&Match=Username&Searchpage=2&Limit=25&Old=allposts&Main=87958>http://www.tractorbynet.com/cgi-bin/compact/showthreaded.pl?Cat=&Board=implement&Number=87958&Search=true&Forum=All_Forums&Words=therrien&Match=Username&Searchpage=2&Limit=25&Old=allposts&Main=87958</A>
 
   / How to store 3PH backhoe?? #16  
Yes, That's a REALLY nice dolly - way fancier than mine. I just hacked together some wood and big casters. I like your mounting pins, and I'm sure mine will fall apart one of these days, but it works for now.
 
 

Tractor & Equipment Auctions

2018 JLG 1644 4x4 15,600lb High-Capacity Rough Terrain Telehandler (A49461)
2018 JLG 1644 4x4...
2013 Ford Explorer SUV (A50324)
2013 Ford Explorer...
2018 Ram 3500 Bucket Truck with Duralift DTS29 - 34FT Walk-In Bucket, HEMI Gas, 98K Miles (A51039)
2018 Ram 3500...
1994 Mack CH613 T/A Wet Kit Day Cab Truck Tractor (A49461)
1994 Mack CH613...
2020 INTERNATIONAL LT625 TANDEM AXLE SLEEPER TRUCK (A51222)
2020 INTERNATIONAL...
2022 New Holland Workmaster 120 MFWD Compact Utility Tractor (A51039)
2022 New Holland...
 
Top