HST fan

[Marauder]

I found mine online through member ptsg but I think there is a sticky for it. I looked through mine and could not find the procedure but it has to be there somewhere. Here is mine but if you search around maybe on this site you might find one for yours
YMMV
http://demss.co.kr/dossfile/manualnew/WM/TB150[CX2510(H),CX2510(H)(N)-EU]_WM-ALL-200327.pdf

You can also look through this thread:

Kioti Workshop Manuals

The links are not in english but the manuals are! Directory Listing of /info-kioti/Werkstättenhandbücher/ Enjoy:) CK 20 CK 22 CK 25-30 CK 35 CK 2810 CS2610 DK 35-40-450 DK 45-50 DK 451 DK 751 DK 901 DS 4510 DX 7510-9010 EX 45-50 LX 500 NX Series RX6010 RX6020 - 7320

www.tractorbynet.com

 

[Krazi]

thanks. will look at it when I have more time

 

[Krazi]

What does it take to replace? Had 7 hours on it and ran a stick into it. Had muffs on and didn't hear a thing. Took all the blades off it.

Ordered the fan from the dealer. got here in just a few days. 15 bucks. Took about an hour to replace it. Kind of tight quarters underneath and was working with 1/4 inch drive stuff. The only big problem was trying to keep the shaft from turning when tightening/loosening the bolts. Screwdriver in the nuckel is what I ended up with.