HTF parts MF 135

[The kid]

I guess the only way I'll find these is in a salvage yard. Part # 515142M92 Listed as a Platform Assembly, Battery and Instrument.

Also looking for the pre-cleaner top for my air filter Part # 510774M92

I've got several request sent out to salvage yards and so far no response.

-robert

 

[vegaome]

I don't know Kid. They made allot of 135. Id say you have a chance. Is the pre cleaner the same as th UK ones. I think I seen some in a Tractor Magazine. I will have to check.

v/r

Mike

 

[WilliamBos]

Did you check with AGCO?

I guess the only way I'll find these is in a salvage yard. Part # 515142M92 Listed as a Platform Assembly, Battery and Instrument.

Also looking for the pre-cleaner top for my air filter Part # 510774M92

I've got several request sent out to salvage yards and so far no response.

-robert

 

[The kid]

Did you check with AGCO?

Thanks for the tip Will, but already contacted a few Agco dealers and they say they are discontinued items. So back to plan A searching out some salvage yards. I've already sent out several request and also got some good leads from some helpful MF dealers. I might get lucky. -robert

 

[WilliamBos]

Try Fawcetts

http://m.fawcett.cc/

Try Sparex.

http://v2.us.sparex.com/?Culture=en-us

 

[The kid]

This one?

S.42633 Battery Box 1868339M91 New

Thanks Will. I appreciate that. It sure looks like mine. I'll check it out. -robert

 

[WilliamBos]

The description says it is for a 240, but maybe it will work?

 

[Mike476]

I've come across two or three that are close but aren't listed for the 135. How bad is yours, any chance of salvaging it?

 

[The kid]

I've come across two or three that are close but aren't listed for the 135. How bad is yours, any chance of slavaging it?

I'm missing about a third of the platform the original battery sat on. Looking at vintage photos, the original battery was quite large. Back then you know they had the refillable cells which is what eat this one up. I can live without it. Mike, I'm old school. I like to look under the hood. So I'd like to have things in order under there. I just pulled the steering wheel off and going to remove the instrument panel to take a closer look at that piece and compare it to the one Sparex has. I hope it's the same. Push come to shove, I could Weld this one up to look close to the original. -robert

 

[The kid]

The description says it is for a 240, but maybe it will work?

MF used some parts on many different models, so it might work. Thanks. -Robert

 

[Mike476]

I'm old school myself, and in this case functionality is important.

Try this site.

Battery Platform Assembly - Discounted Massey Ferguson Tractor Parts Catalog

 

[Mike476]

Index for the site where the previous link takes you.

Massey Ferguson Tractor Parts Catalog - Discounted Replacement & Aftermarket Farm Tractor Parts

 

[The kid]

Index for the site where the previous link takes you.

Massey Ferguson Tractor Parts Catalog - Discounted Replacement & Aftermarket Farm Tractor Parts

Thanks Mike, this looks like the same part offered by Sparex who manufactures them. -robert

 

[Mike476]

Sparex in the UK is one manufacturer of aftermarket parts, another is Mian in Pakistan, not sure that SSB uses either predominantly.

If the diagram looks close enough that it will fit with slight modification that's better than starting from scratch, assuming it's not too costly.

Good luck!

 

[The kid]

Sparex in the UK is one manufacturer of aftermarket parts, another is Mian in Pakistan, not sure that SSB uses either predominantly.

If the diagram looks close enough that it will fit with slight modification that's better than starting from scratch, assuming it's not too costly.

Good luck!

I found out that Sparex's home office is here in the states. They are international. BTW I found one of those elusive heat shields from a dealer in Wisconsin who had one on the shelf rust free. He's also looking for that battery tray/dashboard piece. Still no luck on the pre-cleaner. My new gauges came in. Replacing them all. Mine used some type of transformer which is long gone. I'll box these up. They fog up anyways, probably trash em.

Was busy today prepping the dash. I removed it and ground all the paint off and will do a tiny bit of body work and a tad of filler. Putting a 12v waterproof accessory plug on the dash too.

It's been in the upper to mid 90's here so I do a bit in the evenings when it's cooler. -robert

 

[jimsmf135]

I got a good used one from the bone yard at my local Massey dealer. They have quite a few 135 they are parting out, I can check it out for you. Jim

 

[The kid]

I got a good used one from the bone yard at my local Massey dealer. They have quite a few 135 they are parting out, I can check it out for you. Jim

Hi Jim, are you talking about the battery/dash platform or the pre-cleaner cap. Either one or both would be sweet. Both are rare to find. If it' not too much trouble I would certainly appreciate the information. Thanks - Robert