Hyd Cyl for front hitch angle kit??

[tcfamy]

Greetings,

Does anyone have the specs on the hydraulic cylinders for the front mount angle kit (590-623-100) for the 5000 / 6000 / 7000 series Cub? Nothing is available thru the dealers and on the usual Ebay, Craigslist. I tried matching up the fixed link to available cylinders from several suppliers, but nothing is intuitively correct. So if you have diameter x stroke, and any other specs - greatly appreciated. I can work on the rest.

Tom

 

[scoutcub]

If no one else responds I can get you the measurements in 3 weeks, when I get back home. I've got an angling kit on my 5234. I would think there should be some aftermarket cylinders that would fit?

 

[tcfamy]

Thanks Scout. Not a big hurry, but who knows when the first snow will hit here! ---- Tom

 

[Cub5k]

If no one else responds I can get you the measurements in 3 weeks, when I get back home. I've got an angling kit on my 5234. I would think there should be some aftermarket cylinders that would fit?

Scout, I would appreciate those measurements also.

 

[scoutcub]

Scout, I would appreciate those measurements also.

No problem....I get home on the 8th of October. I will get measurements and pics directly thereafter....

 

[scoutcub]

OK....looks like body length is 11".....the piston bore is 3/4".....I will get some more measurements tomorrow.

 

[tcfamy]

Thank you Scout!

 

[Cub5k]

Yes, thanks. That makes it much easier.

 

[Cub5k]

OK....looks like body length is 11".....the piston bore is 3/4".....I will get some more measurements tomorrow.

Just double checking, are you sure on the 3/4" bore? That seems kind of small compared to most cylinders I've seen for this use. Maybe because there's 2 of them instead of 1.

 

[scoutcub]

Sorry for the delayed response gents, been up to my ___ in projects.
Yes, the bore is 3/4".
The extended length is ~ 21", and the fully closed length is ~ 14".

Hope this helps!