hydraulic cylinders on a Montana 4940

   / hydraulic cylinders on a Montana 4940 #1  

Gavman

Bronze Member
Joined
Nov 11, 2005
Messages
80
Location
Dallas
Tractor
Montana 4940
I use my 4940 to mow commercially. I want to start box blading commercially as well. I am going to replace my top link with a hydraulic cylinder, as well as put one on the 3pt arm that already has a manual tilt adjustment. Anybody have any advice??
Thanks!
 
   / hydraulic cylinders on a Montana 4940 #2  
What you want is a TNT setup. Search here for TNT or Top and Tilt and you will get literally thousands of posts with good information.

The best place to buy cylinders is Carter & Carter Machinery. The person to talk to is Mark (he posts here as CCI). They are the only ones selling cylinders with the double pilot check valves which, in the opinion of most people, are the only way to go.

Carter & Carter
 
   / hydraulic cylinders on a Montana 4940 #3  
Yes, Like Madreferee said.
Get the top and tilt cylinders with the check valves. (keeps the cylinders from leaking off).
I originally had a set of TNT cylinders without check valves. The tilt cylinder would constanly leak down during use (real PITA).
I now have the CCM cylinders on with check valves. They work SO much better. They stay where you put them and no more leak down..
 

Tractor & Equipment Auctions

2011 GMC Sierra 4x4 Pickup Truck, VIN # 3GTP2WE36BG213306 (A51572)
2011 GMC Sierra...
TORO MBTX 2500 STAND-ON CONCRETE BUGGY (A51406)
TORO MBTX 2500...
2006 MACK GRANITE CV713 DUMP TRUCK (A51406)
2006 MACK GRANITE...
2016 Toro Groundsmaster 3505D 72in Rotary Mower (A51691)
2016 Toro...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A52377)
2019 Allmand...
2014 Doyle Dry Fertilizer Tender Trailer - Kubota Diesel, 3 Stainless Compartments, Side Discharge (A53472)
2014 Doyle Dry...
 
Top