Hydraulic oil top off

   / Hydraulic oil top off #1  

8n Nut

New member
Joined
Mar 26, 2011
Messages
10
Location
Cosby, TN
Tractor
Ford 8N, Ford Jubilee, Ford 2810
Recently got a 53 Ford Jubilee that needs its hydraulic oil topped off. Can I fill the fill inlet by the gearshift and expect it to go to all 3 areas thnat require hydraulic oil e.g. transmission, differential, and pump. It has only 1 hydraulic oil dipstick so I am assuming the 3 sections are connedted and overflow into each other. Thanks for helping. 8n nut
 
   / Hydraulic oil top off #2  
Sorry.. don't work that way.

Did you notice that theye are 2 other fill locations? One under the front left of the seat.. and one behind the right rear of the seat.

trans is a single sump.

hyds is a single sump

diffy is a simgle sump.

PS.. I would advise against using plain hyd oil. A UTF oil meeting ,2c134 specs ( most all do these days ), is the preferred choice.

hyds has a dipstick.

diffy has a check plug left side of pto shaft.

trans has a check plug. right side of trans, about where yer heel rests, above the running board level. it's a plug not a bolt.. DO NOT remove any bolts from the side of the tranny or you will be posting back with even more questions.. :)
 
   / Hydraulic oil top off #3  
A jub manual would help cause there's a lot of changes between the jub and 8N. Welcome to the world of live hydraulics.

Kirk
 

Tractor & Equipment Auctions

2012 Chevrolet Silverado 3500HD Enclosed Service Truck (A53422)
2012 Chevrolet...
Takeuchi TB016 (A53317)
Takeuchi TB016...
TEST YOUR BID BUTTON! (A57192)
TEST YOUR BID...
2013 3400QB SUNDANCE 5TH WHEEL CAMPER (A52472)
2013 3400QB...
JOHN DEERE 7210R TRACTOR (A54756)
JOHN DEERE 7210R...
2013 Vermeer V800 T/A Towable Vacuum Trailer (A50324)
2013 Vermeer V800...
 
Top